Mumbai University SE Mechanical syllabus

Mumbai University · Second Year Mechanical Engineering · NEP 2020

Strength of Materials

2403112 · Semester III · 3 credits · Internal tests 40 + end-semester 60

The paper format printed for this course (six questions of 20 marks, answer four) adds up to 80, not the 60 marks in the scheme, so no format is shown here; its module weightage follows lecture hours.

  1. Module 1: Stress, Strain and Principal Stresses

    8 hours

    Hooke's law; tension, compression and shear; the stress–strain diagram; elastic constants and their relations; volumetric strain; thermal stress; principal stresses and planes; Mohr's circle.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Types of loads, stress and strain
    • Hooke's law and elastic constants
    • Relations between elastic constants
    • Stress–strain diagrams and factor of safety
    • Thermal stresses in plain and composite bars
    • Principal stresses and planes
    • Mohr's circle for plane stress
  2. Module 2: Moment of Inertia, Torsion and Strain Energy

    10 hours

    Area moment of inertia, the parallel axis theorem and polar moment; the torsion equation for solid and hollow shafts and power transmission; strain energy under gradual, sudden and impact loads and in bending and torsion.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Moment of inertia of common sections
    • Parallel axis theorem and polar moment of inertia
    • Torsion of circular shafts
    • Power transmission by shafts: strength and rigidity
    • Strain energy under gradual, sudden and impact loads
    • Strain energy in bending and torsion
  3. Module 3: Shear Force and Bending Moment Diagrams

    5 hours

    Types of beams, supports and loads; relation between load, shear force and bending moment; SFD and BMD for point loads, UDL, couples and their combinations.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Beams, supports and types of loading
    • Relation between load, shear force and bending moment
    • SFD and BMD for point loads and UDL
    • SFD and BMD for UVL, couples and combined loads
  4. Module 4: Stresses in Beams and Thin Shells

    6 hours

    Theory of bending and bending stress distribution; shear stress distribution in simply supported and cantilever beams; stresses and deformation in thin cylindrical and spherical shells.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Theory of simple bending and the flexure formula
    • Bending stress distribution and section modulus
    • Shear stress distribution in beams
    • Thin cylindrical and spherical shells
  5. Module 5: Deflection of Beams

    5 hours

    Slopes and deflections by double integration and Macaulay's method for point and distributed loads.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Double integration method
    • Macaulay's method
  6. Module 6: Columns

    5 hours

    Buckling load; end conditions; Euler's theory and its limits; Rankine's formula.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Euler's theory of columns and end conditions
    • Limitations of Euler's theory
    • Rankine's formula

Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.