Mumbai University · Second Year Electronics and Telecommunication Engineering · NEP 2020
Network Theory and Control System
2303114 · Semester III · 3 credits · Internal tests 40 + end-semester 60
End-semester paper (2 hours): Six questions of 15 marks; Q1 is compulsory and you answer four. Each module's share of the paper follows its lecture hours.
Module 1: Circuit Analysis
4 hoursMesh and nodal analysis with dependent sources; supermesh and supernode; superposition, Thevenin, Norton and maximum power transfer with dependent sources.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Mesh and nodal analysis with dependent sources
- Supermesh and supernode analysis
- Network theorems with dependent sources
Module 2: Time and Frequency-domain Analysis
8 hoursForced and natural response of RL and RC circuits; initial and final values; RLC circuits and the damping factor; step response.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Transient response of RL and RC circuits
- Initial and final conditions
- Step response of RLC circuits and damping
Module 3: Network Functions and Two-port Networks
6 hoursDriving-point and transfer functions; poles and zeros; open-circuit, short-circuit, transmission and hybrid parameters; reciprocity and symmetry.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Network functions: driving point and transfer
- Poles and zeros of network functions
- Two-port parameters: Z, Y, ABCD and h
- Reciprocity and symmetry in two-port networks
Module 4: Control System Response
8 hoursOpen and closed loops; transfer function modelling; block diagram reduction and signal flow graphs; test signals; first and second-order response; steady-state errors.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Open-loop and closed-loop control systems
- Transfer function modelling
- Block diagram reduction
- Signal flow graphs and Mason's gain formula
- Time response of first and second-order systems
- Steady-state error
Module 5: Stability in the Time Domain
6 hoursRouth–Hurwitz criterion; root locus rules and analysis.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Routh–Hurwitz stability criterion
- Root locus
Module 6: Stability in the Frequency Domain
7 hoursFrequency-domain specifications and their relation to time response; Bode plots and stability margins; polar plots.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Frequency-domain specifications
- Bode plot and stability margins
- Polar plot
Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.