Mumbai University SE EXTC syllabus

Mumbai University · Second Year Electronics and Telecommunication Engineering · NEP 2020

Microcontroller

2304112 · Semester IV · 3 credits · Internal tests 40 + end-semester 60

End-semester paper (2 hours): Six questions of 15 marks; Q1 is compulsory and you answer four. Each module's share of the paper follows its lecture hours.

  1. Module 1: Microprocessor-based Systems

    5 hours

    Components of a microcomputer; memory signal lines; fetch and execute after reset; RISC and CISC; Harvard and von Neumann.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Components of a microcomputer
    • Von Neumann and Harvard, CISC and RISC architectures
  2. Module 2: Memory Systems

    4 hours

    Primary and secondary memory; semiconductor memories; SRAM and DRAM; cache; virtual memory, segmentation and paging.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Primary and secondary memory
    • SRAM, DRAM and cache memory
    • Virtual memory: segmentation and paging
  3. Module 3: 8051 and Assembly Programming

    9 hours

    Microprocessors versus microcontrollers; 8051 features, architecture and pins; machine cycle; memory; addressing modes; instruction set; assemblers and directives; arithmetic and logic programs.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Microprocessors versus microcontrollers
    • 8051 architecture and register set
    • 8051 memory organisation
    • 8051 addressing modes and instruction set
    • 8051 assembly programming
  4. Module 4: 8051 Ports, Timers, Interrupts and Serial I/O

    9 hours

    Port structure; timer modes; interrupts; serial modes; programs for delays, ports, timers, counters, serial I/O and interrupts; LEDs, relays and switches.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • 8051 pin diagram and port structure
    • 8051 timers, counters and delay generation
    • 8051 interrupts and serial communication
    • Interfacing LEDs, relays and buzzers with the 8051
  5. Module 5: ARM7

    8 hours

    ARM7 features, pipeline and programmer's model; exceptions and interrupts; Cortex-A, R and M; data processing, transfer and control-flow instructions.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • ARM core data flow and programmer's model
    • ARM7 pipeline and exceptions
    • ARM instruction set
    • Cortex-A, Cortex-R and Cortex-M
  6. Module 6: 8-bit Microcontroller Applications

    4 hours

    Embedded versus general computing; choosing a microcontroller; ATmega328, LPC2148, MSP430 and STM32 features; case studies.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Selecting a microcontroller
    • Embedded systems versus general computing
    • ATmega328, LPC2148, MSP430 and STM32 compared

Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.