Mumbai University SE EXTC syllabus

Mumbai University · Second Year Electronics and Telecommunication Engineering · NEP 2020

Digital System Design

2303113 · Semester III · 3 credits · Internal tests 40 + end-semester 60

End-semester paper (2 hours): Six questions of 15 marks; Q1 is compulsory and you answer four. Each module's share of the paper follows its lecture hours.

  1. Module 1: Number Systems and Codes

    2 hours

    Binary, octal and hexadecimal; Gray and BCD codes; 1's and 2's complement arithmetic.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Number systems and codes
    • Binary arithmetic with 1's and 2's complement
  2. Module 2: Logic Families and Minimisation

    8 hours

    Unipolar and bipolar families; IC characteristics; TTL versus CMOS; universal gates; Boolean algebra and De Morgan; SOP, POS and K-maps.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Characteristics of digital ICs
    • CMOS gates and CMOS versus TTL
    • Boolean algebra and universal gates
    • SOP and POS forms of logic functions
    • K-map minimisation with don't-care conditions
  3. Module 3: Combinational Logic Circuits

    8 hours

    Adders and subtractors; multiplexers and demultiplexers; code converters; BCD adder; magnitude comparator; functions with MUX, DEMUX, encoders and decoders.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Adders, subtractors and the look-ahead carry generator
    • BCD adder
    • Code converters
    • Magnitude comparator
    • Multiplexers and multiplexer trees
    • Demultiplexers and decoders
  4. Module 4: Sequential Logic Circuits

    10 hours

    SR, JK, T, D and master–slave flip-flops; excitation tables and conversion; asynchronous and synchronous counters; Moore and Mealy machines.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Latches and the SR flip-flop
    • JK, master–slave JK, D and T flip-flops
    • Excitation tables and flip-flop conversion
    • Ripple and mod-n counters
    • Synchronous and up/down counters
    • Moore and Mealy machines
  5. Module 5: Shift Registers and PLDs

    6 hours

    SISO, SIPO, PISO, PIPO and universal registers; ring and Johnson counters; sequence generators; PLA and PAL; CPLD and FPGA.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Registers and shift registers
    • Ring and twisted-ring counters, sequence generators
    • PROM, PAL and PLA
    • CPLD and FPGA architecture
  6. Module 6: Introduction to VHDL

    5 hours

    Front-end design flow; modelling styles; data types and objects; synthesis and simulation; combinational and sequential logic in VHDL.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • VHDL: library, entity and architecture
    • Modelling styles and data objects
    • VHDL for multiplexers and flip-flops

Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.