Mumbai University · Second Year Electronics and Telecommunication Engineering · NEP 2020
Analog and Digital Communication
2304113 · Semester IV · 3 credits · Internal tests 40 + end-semester 60
End-semester paper (2 hours): Six questions of 15 marks; Q1 is compulsory and you answer four. Each module's share of the paper follows its lecture hours.
Module 1: Introduction
2 hoursAnalog and digital communication systems; signal-to-noise ratio; noise factor, figure and temperature; Friis formula.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Elements and types of communication systems
- Noise calculations and noise figure
- Noise temperature and Friis formula
Module 2: Analog Modulation and Demodulation
10 hoursAM waves, voltage and power; DSB-SC and SSB; diode detectors; FM, deviation ratio and bandwidth; narrowband and wideband FM; pre-emphasis and de-emphasis; varactor and Armstrong generation; Foster–Seeley detector; superheterodyne receivers.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- AM spectrum, modulation index and power
- DSB-SC modulation
- SSB and VSB modulation
- Envelope detection and the AM superheterodyne receiver
- Frequency modulation and modulation index
- Narrowband and wideband FM
- Pre-emphasis and de-emphasis
- FM generation: Armstrong's method
- Foster–Seeley discriminator
Module 3: Pulse Modulation and Multiplexing
7 hoursSampling theorem and techniques; aliasing and aperture effect; PAM, PWM and PPM; PCM; DM and ADM; TDM and FDM.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Sampling theorem and types of sampling
- Aliasing and aperture effect
- PAM, PWM and PPM
- Pulse code modulation
- Delta and adaptive delta modulation
- TDM and FDM
Module 4: Source and Channel Coding
7 hoursInformation and entropy; the Shannon–Hartley theorem; Huffman and Shannon–Fano coding; linear block and convolutional codes.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Entropy and information
- Shannon–Hartley theorem
- Huffman and Shannon–Fano coding
- Linear block codes
- Convolutional codes
Module 5: Baseband Transmission
4 hoursBaseband transmitter and receiver; line codes and their properties; ISI and inter-channel interference; matched filter.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Line coding formats
- Inter-symbol interference
- Matched filter
Module 6: Bandpass Transmission
8 hoursGeneration, detection, error probability and bandwidth of BASK, BFSK, BPSK, QPSK, OQPSK, M-ary PSK, 16-QASK and MSK.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- BASK, BFSK and BPSK
- QPSK, OQPSK and M-ary PSK
- QASK and MSK
- Error probability of digital modulations
Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.