Mumbai University · Second Year Electrical Engineering · NEP 2020
Measurements and Measuring Instruments
2223114 · Semester III · 3 credits · Internal tests 40 + end-semester 60
End-semester paper (2 hours): Six questions of 15 marks; Q1 is compulsory and you answer four.
Module 1: Philosophy of Measurement
4 hoursMethods of measurement; classification of instruments; types of errors; standards and calibration.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Classification of measuring instruments
- Types of errors in measurement
- Standards and calibration of instruments
Module 2: Analog Measurement of Electrical Quantities
7 hoursOperating, controlling and damping torques; extending ammeter and voltmeter ranges; electrodynamometer wattmeter and power factor meter; measuring and protection CTs; PTs; clamp-on ammeters.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Deflecting, controlling and damping systems
- Extending the range of ammeters and voltmeters
- Dynamometer wattmeter
- Electrodynamometer power factor meter
- Current and potential transformers
- Clamp-on ammeter
Module 3: AC and DC Bridges and Potentiometer
7 hoursWheatstone and Kelvin's double bridges; megger; earth resistance; Maxwell's and Schering bridges; calibrating meters with a potentiometer.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Wheatstone bridge
- Kelvin's double bridge
- Measuring high resistance: loss of charge and megger
- Earth resistance measurement
- Maxwell's bridges
- Schering bridge
- Potentiometer and its applications
Module 4: Measurement of Non-electrical Quantities
7 hoursResistive, capacitive, inductive, optical and digital transducers; thermocouples, thermistors and RTDs; potentiometers and LVDTs for displacement; piezoelectric, strain-gauge, capacitive and inductive pressure sensors; speed by inductive and Hall sensors.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Classification and selection of transducers
- Thermocouples, thermistors and RTDs
- LVDT and RVDT
- Electrical methods of pressure measurement
- Temperature, Hall-effect and piezoelectric sensors
Module 5: Digital Measurement of Electrical Quantities
7 hoursDigital instruments and their advantages; resolution and sensitivity; ramp DVM; digital ammeters, multimeters, frequency meters, tachometers and meggers; DSO; ACS712 current and B25 voltage sensors.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Resolution and sensitivity of digital meters
- Digital voltmeter and frequency meter
- Digital storage oscilloscope
- Current and voltage sensor modules
Module 6: Signal Conditioning and Advanced Instruments
7 hoursAC and DC signal conditioning; data acquisition systems; power and harmonic analysers; signal generators; Q-meter; smart sensors; IoT-based instruments and smart energy meters.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Signal conditioning circuits
- Data acquisition systems
- Power quality analyser
- Q-meter and signal generator
- Smart sensors and IoT-based meters
Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.