Mumbai University SE Electrical syllabus

Mumbai University · Second Year Electrical Engineering · NEP 2020

Engineering Mathematics for Signals and Systems

2224111 · Semester IV · 3 credits · Internal tests 40 + end-semester 60

End-semester paper (2 hours): Six questions of 15 marks; Q1 is compulsory and you answer four.

Also carries 25 marks of term work: tutorials, assignments and attendance.

  1. Module 1: Introduction to Signals and Systems

    4 hours

    Impulse, step and ramp signals; analog-to-digital conversion; the sampling theorem; classification and operations on signals; CT and DT systems and their properties; DT convolution by the matrix method.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Basic continuous and discrete signals
    • Sampling theorem
    • Classification of signals and signal operations
    • Properties of systems
    • Discrete-time convolution
  2. Module 2: Fourier Series and Fourier Transform

    4 hours

    Trigonometric and exponential Fourier series; Parseval's theorem; power spectrum and power spectral density; Fourier transform and its properties; energy spectral density; frequency response of CT systems; DTFS and DTFT.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Trigonometric and exponential Fourier series
    • Parseval's theorem and power spectrum
    • Fourier transform and its properties
    • Energy spectral density
    • Introduction to DTFS and DTFT
  3. Module 3: Z-Transform

    5 hours

    One- and two-sided Z-transforms; ROC and its properties; properties of the Z-transform; inverse Z-transform by long division, partial fractions and residues.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Z-transform and region of convergence
    • Properties of the Z-transform
    • Inverse Z-transform
  4. Module 4: Analysis of DT LTI Systems with the Z-Transform

    5 hours

    Pole-zero plots; transfer functions; solving difference equations; impulse and step response.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Pole-zero plots
    • Transfer function, impulse and step response
    • Solving difference equations with the Z-transform
  5. Module 5: Frequency-domain Analysis of DT LTI Systems

    4 hours

    Fourier and Z-transforms related; low-pass, high-pass, band-pass, band-reject and all-pass systems; classification by phase response and zeros; IIR and FIR systems.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Fourier transform and Z-transform
    • Frequency-selective filters
    • Phase response and minimum-phase systems
    • IIR and FIR systems
  6. Module 6: Realisation of Linear Systems

    4 hours

    Block-diagram realisation of CT and DT systems; FIR structures; IIR direct form I and II, cascade and parallel structures.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Block diagram realisation
    • FIR structures
    • IIR direct-form, cascade and parallel structures

Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.