Mumbai University SE Electrical syllabus

Mumbai University · Second Year Electrical Engineering · NEP 2020

Electrical Machines I

2223112 · Semester III · 3 credits · Internal tests 40 + end-semester 60

End-semester paper (2 hours): Six questions of 15 marks; Q1 is compulsory and you answer four.

  1. Module 1: DC Machines

    8 hours

    Back EMF and torque; commutation and armature reaction; types and characteristics; starters; speed control; losses and efficiency; Swinburne's and Hopkinson's tests.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Back EMF and torque equation of DC motors
    • Armature reaction and commutation
    • Characteristics of DC shunt and series motors
    • DC motor starters
    • Speed control of DC motors
    • Losses and efficiency of DC machines
    • Swinburne's and Hopkinson's tests
  2. Module 2: Single-phase Transformer

    8 hours

    EMF equation and equivalent circuit; phasor diagrams for resistive, inductive and capacitive loads; regulation; losses and maximum efficiency; parallel operation with equal and unequal voltages; OC and SC tests; Sumpner's test.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Equivalent circuit of a transformer
    • Phasor diagrams of a transformer
    • Voltage regulation of a transformer
    • Efficiency and all-day efficiency
    • Parallel operation and load sharing
    • Open-circuit and short-circuit tests on transformers
    • Sumpner's test
  3. Module 3: Three-phase Transformer

    7 hours

    Connections and phasor groups; parallel operation; harmonics and their suppression; the oscillating neutral; open-delta and Scott connections.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Three-phase transformer connections
    • Vector groups
    • Harmonics and the oscillating neutral
    • Scott and V-V connections
  4. Module 4: Three-phase Induction Motor

    8 hours

    Slip; rotor EMF, frequency, current and power; power stages; phasor diagram and equivalent circuit; torque–speed characteristics; losses and efficiency; no-load and blocked-rotor tests; circle diagram.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Rotating magnetic field and slip
    • Rotor EMF, frequency and current
    • Power flow in an induction motor
    • Equivalent circuit of an induction motor
    • Torque equation and torque-slip characteristics
    • No-load and blocked-rotor tests
    • Circle diagram
  5. Module 5: Starting and Speed Control of Induction Motors

    4 hours

    DOL, rotor-resistance, autotransformer and star–delta starters; speed control by voltage, frequency, pole changing and V/f.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Starters for induction motors
    • Speed control of induction motors
    • V/f control of induction motors
  6. Module 6: Single-phase Induction Motor

    4 hours

    Double revolving field theory; equivalent circuit; resistance and capacitor split-phase, capacitor start-and-run and shaded-pole starting.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Double revolving field theory
    • Starting methods of single-phase induction motors

Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.