Mumbai University · Second Year Civil Engineering · NEP 2020
Surveying
2094112 · Semester IV · 3 credits · Internal tests 40 + end-semester 60
End-semester paper (2 hours): Six questions of 15 marks; Q1 is compulsory and you answer four.
Module 1: Introduction
6 hoursSurvey of India and revenue survey records (7/12 extract, namuna 8); chaining, ranging and offsets; bearings, dip, declination and local attraction; compass traversing.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Survey records: Survey of India and 7/12 extracts
- Chain surveying: stations, lines and offsets
- Compass traversing and bearings
- Local attraction and magnetic declination
Module 2: Levelling and Contouring
8 hoursDumpy and auto levels and their adjustments; collimation and rise-and-fall methods; curvature, refraction and reciprocal levelling; differential, profile, fly, check and precise levelling; contours and their uses.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Levels and levelling terms
- Reduced levels: collimation and rise-and-fall methods
- Curvature, refraction and reciprocal levelling
- Types of levelling
- Contours and contouring
Module 3: Theodolite Surveying
8 hoursTransit parts and adjustments; horizontal and vertical angles by repetition and reiteration; theodolite traverses, latitudes and departures; Bowditch's and transit rules; Gale's traverse table; omitted measurements.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Theodolite and its adjustments
- Measuring horizontal and vertical angles
- Latitudes and departures
- Balancing a traverse
- Omitted measurements
Module 4: Indirect and Advanced Measurement
7 hoursStadia tacheometry and radial contouring; electronic distance measurement; total station; introduction to GPS, GIS and remote sensing.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Stadia tacheometry
- Electronic distance measurement
- Total station surveying
- GPS, GIS and remote sensing
Module 5: Plane Table Surveying, Areas and Volumes
5 hoursPlane table methods; areas by trapezoidal, average ordinate, Simpson's and coordinate methods; planimeters; volumes by trapezoidal and prismoidal formulae, spot levels and contours.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Plane table surveying
- Areas by trapezoidal and Simpson's rules
- Volumes by trapezoidal and prismoidal formulae
Module 6: Curves
5 hoursTypes of horizontal curves; setting out simple circular curves by linear and angular methods; vertical curves.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Elements of a simple circular curve
- Setting out curves: offsets from chords
- Rankine's method of deflection angles
- Vertical curves
Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.