Mumbai University · Second Year Civil Engineering · NEP 2020
Structural Analysis
2094113 · Semester IV · 3 credits · Internal tests 40 + end-semester 60
End-semester paper (2 hours): Six questions of 15 marks; Q1 is compulsory and you answer four.
Module 1: Determinate and Indeterminate Structures
3 hoursTypes of structures; linear and non-linear behaviour; geometric non-linearity; static and kinematic determinacy.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Static and kinematic indeterminacy
- Linear and non-linear structural behaviour
Module 2: Slope and Deflection of Determinate Structures
8 hoursStrain energy; superposition and virtual work; Castigliano's, Betti's and Maxwell's theorems; Macaulay's and moment-area methods; unit load method for frames and trusses.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Strain energy and Castigliano's theorems
- Betti's and Maxwell's reciprocal theorems
- Slope and deflection by Macaulay's and moment-area methods
- Unit load method for frames and trusses
Module 3: Rolling Loads and Influence Lines
6 hoursInfluence lines for reactions, shear and moment in cantilever, simply supported and overhanging beams; maximum and absolute maximum shear and moment under UDLs and point loads.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Influence lines for beams
- Rolling loads and absolute maximum bending moment
Module 4: Force Methods
8 hoursClapeyron's three-moment theorem for fixed and continuous beams; flexibility coefficients and compatibility; propped cantilevers, fixed and continuous beams and simple frames.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Fixed beams
- Theorem of three moments
- Propped cantilever by consistent deformation
- Flexibility and stiffness concepts
Module 5: Displacement Methods
11 hoursSlope-deflection equations; stiffness coefficients; direct stiffness method; moment distribution for beams and single-sway frames, including support settlement.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Slope-deflection equations
- Stiffness method: structure and member approaches
- Beams by moment distribution
- Non-sway frames by moment distribution
Module 6: Plastic Analysis
6 hoursPlastic hinges, plastic moment and shape factor; static and kinematic methods; collapse loads of single- and multi-span beams.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Plastic hinges and shape factor
- Collapse loads by static and kinematic methods
Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.