Mumbai University · Second Year Civil Engineering · NEP 2020
Mechanics of Structures
2093114 · Semester III · 3 credits · Internal tests 40 + end-semester 60
End-semester paper (2 hours): Six questions of 15 marks; Q1 is compulsory and you answer four.
The syllabus prints only Module 3's title for its three parts.
Module 1: Stresses and Strains in Elastic Members
6 hoursStress–strain curves; elastic moduli and their relations; three-dimensional stress and strain; Poisson's ratio; bars of varying and composite section; temperature stresses.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Stress, strain and stress–strain diagrams
- Elastic constants and their relations
- Bars of composite sections
- Temperature stresses
Module 2: Beams and Portal Frames
8 hoursAxial force, shear force and bending moment diagrams for determinate beams with and without internal hinges, and for three-member portal frames.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Shear force and bending moment: concepts and relations
- SFD and BMD for point loads and UDL
- Axial force, shear and moment in portal frames
Module 3: Moment of Inertia, Bending and Shear Stresses
9 hoursArea moment of inertia; bending stresses; shear stresses in beams. (The syllabus prints only the module title for its three parts.)
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Area moment of inertia
- Theory of simple bending and the flexure formula
- Shear stress distribution across sections
Module 4: Torsion and Columns
7 hoursTorsion of solid, hollow and stepped shafts and power transmission; direct and bending stresses and the core of a section; buckling, effective length, Euler's and Rankine's formulae.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Torsion of circular shafts
- Power transmitted by shafts
- Direct and bending stresses: eccentric loading
- Core of a section
- Euler's theory of columns and effective length
- Rankine's formula
Module 5: Principal Planes and Stresses
4 hoursStress transformation; principal stresses and maximum shear stress; Mohr's circle.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Principal stresses and maximum shear stress
- Mohr's circle
Module 6: Trusses and Three-hinged Arches
5 hoursPerfect plane trusses by joints and sections; normal thrust, radial shear and bending moment in symmetrical and unsymmetrical three-hinged parabolic arches.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Analysis of trusses by joints and sections
- Three-hinged parabolic arches
Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.