Mumbai University SE Civil syllabus

Mumbai University · Second Year Civil Engineering · NEP 2020

Fluid Mechanics

2093112 · Semester III · 3 credits · Internal tests 40 + end-semester 60

End-semester paper (2 hours): Six questions of 15 marks; Q1 is compulsory and you answer four.

  1. Module 1: Properties of Fluids

    5 hours

    Mass and weight density, specific gravity and volume; viscosity on horizontal and inclined planes; compressibility; surface tension, capillarity and vapour pressure; types of fluids.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Properties of fluids
    • Viscosity and Newton's law of viscosity
    • Surface tension and capillarity
  2. Module 2: Fluid Statics

    7 hours

    Pascal's and hydrostatic laws; absolute, gauge and atmospheric pressure; U-tube differential manometers; total pressure and centre of pressure on horizontal, vertical and inclined surfaces; buoyancy and metacentric height.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Pressure and its measurement
    • Total pressure and centre of pressure
    • Buoyancy and metacentric height
  3. Module 3: Fluid Kinematics and Dynamics

    6 hours

    Types of flow; Lagrangian and Eulerian descriptions; continuity; velocity and acceleration; control volumes; Navier–Stokes and Euler's equations; Bernoulli's theorem for ideal and real fluids and its applications.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Types of flow and flow lines
    • Continuity equation
    • Velocity and acceleration of fluid particles
    • Euler's equation and Bernoulli's equation
    • Navier-Stokes equation
  4. Module 4: Flow Measurement

    7 hours

    Venturimeter and orifice meter; orifices, hydraulic coefficients, large and submerged orifices and mouthpieces; rectangular, triangular and trapezoidal notches and weirs; velocity of approach.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Venturimeter and orifice meter
    • Orifices and mouthpieces
    • Notches and weirs
  5. Module 5: Flow through Pipes

    9 hours

    Darcy–Weisbach; major and minor losses; HGL and TEL; pipes in series and parallel and equivalent pipes; siphons; water hammer; power transmission through nozzles.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Turbulent flow and Darcy–Weisbach equation
    • Minor losses in pipes
    • Hydraulic gradient and energy lines
    • Pipes in series and parallel
    • Siphons, water hammer and power through nozzles
  6. Module 6: Laminar and Turbulent Flow

    5 hours

    Reynolds' experiment and critical velocity; laminar flow in circular pipes; Prandtl's mixing length; smooth and rough boundaries and velocity distribution.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Reynolds' experiment
    • Laminar flow: Hagen–Poiseuille equation
    • Prandtl's mixing length and velocity distribution

Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.