Mumbai University BE Mechanical syllabus

Mumbai University · Final Year Mechanical Engineering · Rev-2019 'C' Scheme

Vehicle Systems

MEDLO7033 · Department Optional Course 3 · Semester VII · 3 credits · Internal tests 20 (average of two) + end-semester 80

End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four. Each module's share of the paper follows its lecture hours.

One of the Department Optional Course 3 options.

All notes for this subject
  1. Module 1: Power Flow, Clutches and Transmission

    8 hours

    Front and rear engine layouts; single-plate, multi-plate, centrifugal and electromagnetic clutches; the fluid flywheel; sliding, constant and synchromesh gearboxes; planetary sets and torque converters; automatic transmissions; UV and CV joints; propeller shafts; 2WD and 4WD.

    Examined in the 80-mark end-semester paper (about 21% of it, by lecture hours); the class tests cover what has been taught by then

    • Power flow layouts
    • Clutches and fluid flywheel
    • Gearboxes and automatic transmissions
    • Universal and CV joints
    • Propeller shaft design
  2. Module 2: Final Drive, Axles, Steering and Brakes

    8 hours

    Spiral, bevel, hypoid and worm final drives; differentials; live and stub axles; steering gearboxes, geometry, alignment and power steering; hydraulic, air, electric and regenerative brakes; ABS and EBD.

    Examined in the 80-mark end-semester paper (about 21% of it, by lecture hours); the class tests cover what has been taught by then

    • Final drive and differential
    • Rear axle types
    • Front stub axles
    • Steering gears and power steering
    • Steering geometry and wheel alignment
    • Hydraulic and air brakes
    • Anti-lock braking systems
  3. Module 3: Suspension, Wheels and Tyres

    6 hours

    Independent, dependent and air suspension; shock absorbers and leaf springs; tyre construction, dimensions and specifications; wheels and hubs.

    Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then

    • Independent suspension systems
    • Shock absorbers
    • Wheels and tyres
  4. Module 4: Automotive Electrical Systems

    8 hours

    Lead-acid, alkaline, NiMH and Li-ion batteries and charging; starter drives; dynamos and alternators; ignition and engine control; lamps, gauges and multiplex wiring; horns, wipers, power windows and OBD.

    Examined in the 80-mark end-semester paper (about 21% of it, by lecture hours); the class tests cover what has been taught by then

    • Automotive batteries and charging
    • Starting systems
    • Automotive lighting and wiring
    • On-board diagnostics
  5. Module 5: Body Engineering

    6 hours

    Open, semi-integral and integral structures; chassis loads; dimensions and visibility; aerodynamic drag, lift, pitching, yawing and rolling moments.

    Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then

    • Chassis and body structures
    • Vehicle aerodynamics
  6. Module 6: Recent Developments

    3 hours

    Telematics; intelligent vehicles; V2V and V2I communication; AI in vehicles.

    Examined in the 80-mark end-semester paper (about 8% of it, by lecture hours); the class tests cover what has been taught by then

    • Telematics and connected vehicles

Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.