Mumbai University · Final Year Mechanical Engineering · Rev-2019 'C' Scheme
Renewable Energy Systems
MEDLO7032 · Department Optional Course 3 · Semester VII · 3 credits · Internal tests 20 (average of two) + end-semester 80
End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four. Each module's share of the paper follows its lecture hours.
One of the Department Optional Course 3 options.
Module 1: Renewable Energy and Solar Radiation
5 hoursGlobal and national energy scenarios; the role of renewables; solar radiation terms and geometry; earth–sun angles; measuring and estimating radiation on horizontal and inclined surfaces.
Examined in the 80-mark end-semester paper (about 13% of it, by lecture hours); the class tests cover what has been taught by then
- Renewable energy policy in India
- Solar radiation and its measurement
- Solar angles
Module 2: Solar Thermal Energy
7 hoursFlat-plate collectors and their performance; concentrating collectors; air heaters, water heaters, dryers, ponds, stills and cookers; solar space heating, cooling and refrigeration; thermal storage.
Examined in the 80-mark end-semester paper (about 18% of it, by lecture hours); the class tests cover what has been taught by then
- Flat plate collectors
- Concentrating collectors
- Solar thermal devices
- Solar thermal energy storage
Module 3: Solar Photovoltaic Energy
7 hoursPV systems and cell types; tracking; controls and measurement; improving efficiency and life; a 1 kW installation.
Examined in the 80-mark end-semester paper (about 18% of it, by lecture hours); the class tests cover what has been taught by then
- Types of solar cells
- Solar tracking
- Improving solar cell efficiency
- Solar PV system design
Module 4: Wind Energy
6 hoursWind energy conversion systems; wind data and site selection; horizontal and vertical axis machines and their performance; the Betz limit; environmental impact.
Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then
- Types of wind turbines
- Wind site selection
- Betz limit and power coefficient
Module 5: Biomass and Hydrogen
7 hoursBioenergy conversion; biogas plants and KVIC digester design; hydrogen production, storage and use; fuel cells and their types.
Examined in the 80-mark end-semester paper (about 18% of it, by lecture hours); the class tests cover what has been taught by then
- Biogas
- KVIC biogas plant design
- Hydrogen energy
- Fuel cells
Module 6: Geothermal, Ocean Energy and Energy Management
7 hoursGeothermal technologies; wave, tidal and OTEC systems; energy conservation, security and economics; energy audits; ECBC, green buildings and LEED.
Examined in the 80-mark end-semester paper (about 18% of it, by lecture hours); the class tests cover what has been taught by then
- Geothermal energy
- Wave, tidal and OTEC energy
- Energy audit and conservation
- Energy Conservation Building Code and green buildings
Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.