Mumbai University BE Mechanical syllabus

Mumbai University · Final Year Mechanical Engineering · Rev-2019 'C' Scheme

Micro Electro Mechanical Systems

MEDLO8053 · Department Optional Course 5 · Semester VIII · 3 credits · Internal tests 20 (average of two) + end-semester 80

One of the Department Optional Course 5 options. The syllabus prints no paper format for this course.

All notes for this subject
  1. Module 1: Introduction to MEMS

    5 hours

    Characteristics of MEMS; microsystems and products; scaling laws in miniaturisation; applications.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • MEMS and microsystems
    • Scaling laws in miniaturisation
  2. Module 2: MEMS Materials and Manufacturing

    7 hours

    Silicon and other materials; wafer processing; bulk and surface micromachining; wafer bonding; thin-film deposition; lithography; wet and dry etching.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Silicon wafer processing
    • Bulk and surface micromachining
    • Thin-film deposition and lithography
    • Wet and dry etching
  3. Module 3: Microfabrication

    6 hours

    LIGA and moulding; soft lithography and polymer processing; thick-film and low-temperature co-fired ceramic processing.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • LIGA and micromoulding
    • Soft lithography and polymer processing
    • Thick-film and LTCC processing
  4. Module 4: Microsensors

    8 hours

    Principles of microsensors; acoustic-wave, biomedical, chemical, optical, pressure, thermal and acceleration microsensors.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Principles of microsensors
    • Pressure and acceleration microsensors
    • Chemical, optical and biosensors
  5. Module 5: Microactuators

    6 hours

    Electrostatic, piezoelectric, thermal, SMA and electromagnetic microactuators; microvalves and micropumps.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Electrostatic and piezoelectric microactuators
    • Thermal and SMA microactuators
    • Microvalves and micropumps
  6. Module 6: MEMS Applications

    4 hours

    Case studies on materials, processes and design; SMA actuation; medical devices; micropumps.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • MEMS applications in medical devices

Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.