Mumbai University · Final Year Mechanical Engineering · Rev-2019 'C' Scheme
Machinery Diagnostics
MEDLO7041 · Department Optional Course 4 · Semester VII · 3 credits · Internal tests 20 (average of two) + end-semester 80
End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four. Each module's share of the paper follows its lecture hours.
One of the Department Optional Course 4 options.
Module 1: Vibration Basics and Condition Monitoring
7 hoursPeriodic and random motion; RMS, peak and peak-to-peak; time, frequency, phase and orbit analysis; speed and sidebands in diagnosis; maintenance principles and vibration-based condition monitoring.
Examined in the 80-mark end-semester paper (about 18% of it, by lecture hours); the class tests cover what has been taught by then
- Vibration signals: RMS, peak and peak-to-peak
- Time, frequency, phase and orbit analysis
- Vibration-based condition monitoring
Module 2: Vibration Measurement
7 hoursDisplacement, velocity and acceleration transducers; force measurement; laser vibrometers; sensor selection and mounting.
Examined in the 80-mark end-semester paper (about 18% of it, by lecture hours); the class tests cover what has been taught by then
- Vibration transducers
- Laser vibrometry
- Sensor selection and mounting
Module 3: Data Acquisition and Signal Processing
7 hoursClasses of signals; the FFT; plot formats, span and resolution, averaging, windowing and scaling; signal conditioning.
Examined in the 80-mark end-semester paper (about 18% of it, by lecture hours); the class tests cover what has been taught by then
- Signal classification and analysis
- Fast Fourier transform
- Data acquisition settings and windowing
Module 4: Fault Diagnosis I
6 hoursNatural frequency and resonance tests; diagnosing unbalance, bent shafts, misalignment, soft foot and looseness.
Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then
- Resonance testing
- Diagnosing unbalance and bent shafts
- Diagnosing misalignment and looseness
Module 5: Fault Diagnosis II
6 hoursRolling and journal bearing faults; gearbox faults; vane defects in pumps; faults in fans and blowers.
Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then
- Rolling and journal bearing faults
- Gearbox faults
- Faults in pumps, fans and blowers
Module 6: Applications of Condition Monitoring
6 hoursTurbine balancing; sugar mills; journal bearing health; industrial pumps: sensor choice and location, plot types, validation and fault identification.
Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then
- Condition monitoring case studies
Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.