Mumbai University · Final Year Mechanical Engineering · Rev-2019 'C' Scheme
Design for X
MEDLO8062 · Department Optional Course 6 · Semester VIII · 3 credits · Internal tests 20 (average of two) + end-semester 80
End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four. Each module's share of the paper follows its lecture hours.
One of the Department Optional Course 6 options.
Module 1: Design for Manufacture
5 hoursPrinciples for manufacturability; strength and mechanism selection; process capability; feature and geometric tolerances; assembly limits; datums; tolerance stacks.
Examined in the 80-mark end-semester paper (about 13% of it, by lecture hours); the class tests cover what has been taught by then
- Design for manufacture principles
- Process capability and tolerances
- Tolerance stacks and datum features
Module 2: Design for Assembly
8 hoursAssembly, handling and insertion; manual, automatic and robotic assembly; cost of assembly; part count; DFA guidelines.
Examined in the 80-mark end-semester paper (about 21% of it, by lecture hours); the class tests cover what has been taught by then
- Assembly processes
- Manual, automatic and robotic assembly
- DFA guidelines and assembly cost
Module 3: Value Engineering
8 hoursValue engineering and analysis; functional, operational and aesthetic value; problem selection; primary, secondary and unnecessary functions; FAST.
Examined in the 80-mark end-semester paper (about 21% of it, by lecture hours); the class tests cover what has been taught by then
- Value engineering and value analysis
- Function analysis and FAST
Module 4: Product Development Economics
8 hoursQuantitative and qualitative analysis; estimating cash flows; sensitivity analysis; trade-offs and their rules; qualitative factors.
Examined in the 80-mark end-semester paper (about 21% of it, by lecture hours); the class tests cover what has been taught by then
- Product development economics
- Sensitivity analysis and project trade-offs
Module 5: Reliability
5 hoursReliability and maintainability terms; the failure distribution; reliability function, MTTF and hazard rate; the bathtub curve; conditional reliability.
Examined in the 80-mark end-semester paper (about 13% of it, by lecture hours); the class tests cover what has been taught by then
- Reliability function and MTTF
- Hazard rate and the bathtub curve
- Conditional reliability
Module 6: Maintainability
5 hoursDowntime and repair-time distributions; stochastic point processes; reliability under preventive maintenance; repairable systems; design for maintainability.
Examined in the 80-mark end-semester paper (about 13% of it, by lecture hours); the class tests cover what has been taught by then
- Maintainability and downtime
- Reliability under preventive maintenance
- Design for maintainability
Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.