Mumbai University · Final Year Mechanical Engineering · Rev-2019 'C' Scheme
Automotive Power Systems
MEDLO7031 · Department Optional Course 3 · Semester VII · 3 credits · Internal tests 20 (average of two) + end-semester 80
End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four. Each module's share of the paper follows its lecture hours.
One of the Department Optional Course 3 options.
Module 1: Engine Construction, Fuel Supply and Ignition
8 hoursEngine parts and materials; air–fuel requirements and fuels; fuel injection in SI, CI and MPFI engines; battery and magneto ignition; ignition advance; capacitor-discharge and transistorised ignition.
Examined in the 80-mark end-semester paper (about 21% of it, by lecture hours); the class tests cover what has been taught by then
- IC engine construction and materials
- Fuel supply and fuel injection systems
- Battery and magneto ignition systems
- Electronic ignition systems
Module 2: Lubrication, Cooling and Supercharging
6 hoursLubricants, SAE ratings and lubrication systems; the need for cooling and air and liquid cooling; objectives, methods and arrangements of supercharging and turbocharging.
Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then
- Engine lubrication systems
- Engine cooling systems
- Supercharging and turbocharging
Module 3: Emissions, Alternative Fuels and Engine Electronics
8 hoursFormation and control of NOx, HC, CO and particulates; catalytic converters, particulate traps and EGR; Euro and Bharat norms; alcohol, hydrogen, CNG, LPG, biodiesel, biogas and producer gas; the ECM, its sensors, spark, air and idle-speed control.
Examined in the 80-mark end-semester paper (about 21% of it, by lecture hours); the class tests cover what has been taught by then
- Engine emissions and their control
- Alternative fuels
- Electronic engine control and sensors
Module 4: Hybrid and Electric Vehicles
6 hoursHistory, need and scenario of EVs and HEVs; electric and hybrid traction; drive and drivetrain topologies; power and energy requirements.
Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then
- History and need of EVs and HEVs
- Electric and hybrid drivetrain topologies
Module 5: Electric Drives and Controllers
5 hoursElectrical components of EVs and HEVs; AC and DC motor drives; motor speed and torque; controllers.
Examined in the 80-mark end-semester paper (about 13% of it, by lecture hours); the class tests cover what has been taught by then
- Motor drives and controllers for EVs
- Motor torque and speed calculation
Module 6: Energy Sources for EVs and HEVs
6 hoursLead-acid, Li-ion and NiMH batteries and battery management; fuel cells, flywheels and ultracapacitors; hybridising sources; energy management strategies; charging systems and stations; payback; Prius, Insight and Nexon EV.
Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then
- Batteries and battery management systems
- Fuel cells, flywheels and ultracapacitors
- Energy management strategies for EVs
- EV charging stations
Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.