Mumbai University BE Mechanical syllabus

Mumbai University · Final Year Mechanical Engineering · Rev-2019 'C' Scheme

Advanced Vibration

MEDLO7043 · Department Optional Course 4 · Semester VII · 3 credits · Internal tests 20 (average of two) + end-semester 80

End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four. Each module's share of the paper follows its lecture hours.

One of the Department Optional Course 4 options.

  1. Module 1: Multi-degree-of-freedom Systems

    6 hours

    Influence coefficients and reciprocity; generalised coordinates and coupling; Lagrange's equations; Rayleigh and Dunkerley methods; two-rotor and geared systems; eigenvalues by the matrix and Holzer methods.

    Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then

    • Influence coefficients and reciprocity
    • Lagrange's equations for vibration
    • Rayleigh and Dunkerley methods
    • Holzer's method
  2. Module 2: Vibration Isolation and Control

    6 hours

    Isolation theory for harmonic excitation; absorbers and dampers; passive, semi-active and active control.

    Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then

    • Vibration isolation theory
    • Vibration dampers and absorbers
  3. Module 3: Measurement and Modal Analysis

    6 hours

    Transducers, pickups and exciters; signal analysis; dynamic testing; experimental modal analysis; condition monitoring.

    Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then

    • Vibration pickups and exciters
    • Experimental modal analysis
  4. Module 4: Continuous Systems

    7 hours

    Vibration of strings; longitudinal and torsional vibration of rods; the Euler beam equation.

    Examined in the 80-mark end-semester paper (about 18% of it, by lecture hours); the class tests cover what has been taught by then

    • Vibration of strings
    • Longitudinal and torsional vibration of rods
    • Euler beam equation
  5. Module 5: Random Vibration

    7 hours

    Random phenomena and expected values; frequency response; probability distributions and correlation; power spectral density; Fourier transforms and response.

    Examined in the 80-mark end-semester paper (about 18% of it, by lecture hours); the class tests cover what has been taught by then

    • Random vibration and expected values
    • Power spectral density
    • Frequency response function
  6. Module 6: Non-linear Vibration

    7 hours

    Sources of non-linearity; the phase plane; conservative systems and stability; isoclines; perturbation and iteration; self-excited oscillation; Runge–Kutta.

    Examined in the 80-mark end-semester paper (about 18% of it, by lecture hours); the class tests cover what has been taught by then

    • Sources of non-linearity
    • Phase plane and stability
    • Isocline and perturbation methods
    • Self-excited oscillations

Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.