Mumbai University BE EXTC syllabus

Mumbai University · Final Year Electronics and Telecommunication Engineering · Rev-2019 'C' Scheme

System on Chip Design

ECCDLO8011 · Department Optional Course 5 · Semester VIII · 3 credits · Internal tests 20 (average of two) + end-semester 80

End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four. Each module's share of the paper follows its lecture hours.

One of the Department Optional Course 5 options.

  1. Module 1: Introduction to SoC Design

    8 hours

    Trends and flow of SoC design; semiconductor economics; challenges; hardware and software structure; accelerating processors; multiprocessor design.

    Examined in the 80-mark end-semester paper (about 21% of it, by lecture hours); the class tests cover what has been taught by then

    • SoC design flow and trends
    • SoC design approach and challenges
    • SoC components
  2. Module 2: System-level Design

    5 hours

    Complex SoC architecture; processor-centric organisation; hardware and software interconnects; balancing computation and communication; non-processor building blocks.

    Examined in the 80-mark end-semester paper (about 13% of it, by lecture hours); the class tests cover what has been taught by then

    • Processor-centric SoC organisation
    • Hardware and software interconnects
  3. Module 3: RTL Synthesis

    8 hours

    Verilog RTL coding and synthesis guidelines; synthesisable style; FSM coding; memory modelling.

    Examined in the 80-mark end-semester paper (about 21% of it, by lecture hours); the class tests cover what has been taught by then

    • RTL coding guidelines and synthesis
    • FSM coding styles
    • Memory modelling in Verilog
  4. Module 4: SoC Verification

    8 hours

    Verification technologies and methodology; system and block-level verification; timing verification.

    Examined in the 80-mark end-semester paper (about 21% of it, by lecture hours); the class tests cover what has been taught by then

    • SoC verification methodology
    • Timing verification
  5. Module 5: Physical Design

    6 hours

    Partitioning, floorplanning, placement and global routing; physical verification and sign-off.

    Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then

    • Partitioning
    • Floorplanning
    • Placement
    • Routing
    • Physical verification and sign-off
  6. Module 6: Reconfigurable SoC Arithmetic

    4 hours

    16-bit carry-skip and carry-select adders on FPGA LUTs; a divide-and-conquer 4×4 multiplier.

    Examined in the 80-mark end-semester paper (about 10% of it, by lecture hours); the class tests cover what has been taught by then

    • FPGA adders using LUTs
    • LUT-based multiplier design

Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.