Mumbai University · Final Year Electronics and Telecommunication Engineering · Rev-2019 'C' Scheme
Robotics
ECCDLO7021 · Department Optional Course 4 · Semester VII · 3 credits · Internal tests 20 (average of two) + end-semester 80
End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four. Each module's share of the paper follows its lecture hours.
One of the Department Optional Course 4 options.
Module 1: Basic Concepts
3 hoursHistory; robot types, classification and specifications; design and control issues; manipulators; sensors and work cells; programming languages.
Examined in the 80-mark end-semester paper (about 8% of it, by lecture hours); the class tests cover what has been taught by then
- Types of robots and robot anatomy
- Robot specifications and work cells
- Robot programming methods
Module 2: Direct and Inverse Kinematics
8 hoursPosition and orientation; homogeneous transformations; joints and degrees of freedom; Denavit–Hartenberg parameters; forward and inverse kinematics; closed-form solutions; SCARA robots.
Examined in the 80-mark end-semester paper (about 21% of it, by lecture hours); the class tests cover what has been taught by then
- Position and orientation representation
- Homogeneous transformations
- Denavit-Hartenberg parameters
- Forward kinematics
- Inverse kinematics
- SCARA robot kinematics
Module 3: Path Planning
8 hoursJoint-space and Cartesian-space planning; cubic and higher-degree polynomials; straight-line and circular paths; position and orientation planning.
Examined in the 80-mark end-semester paper (about 21% of it, by lecture hours); the class tests cover what has been taught by then
- Trajectory planning
- Joint-space and Cartesian-space planning
- Cubic polynomial trajectories
Module 4: Dynamics and Control
7 hoursLagrangian mechanics; a 2-DOF manipulator; Lagrange–Euler formulation; linear and PID control; force control.
Examined in the 80-mark end-semester paper (about 18% of it, by lecture hours); the class tests cover what has been taught by then
- Lagrange–Euler dynamics
- Dynamics of a 2-DOF manipulator
- Control loops and PID in robots
- Force control
Module 5: Service Robotics
7 hoursNeed for service robots; map representation and probabilistic and Monte Carlo localisation; landmarks and beacons; cell decomposition and potential-field planning; obstacle avoidance.
Examined in the 80-mark end-semester paper (about 18% of it, by lecture hours); the class tests cover what has been taught by then
- Service robots
- Robot localisation and Monte Carlo localisation
- Path planning and obstacle avoidance
Module 6: Applications
6 hoursAerial robots; collision avoidance; robots in agriculture, mining, underwater, military, nuclear and space work; humanoids.
Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then
- Industrial robot applications
- Aerial, underwater and space robots
- Humanoid robots
Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.