Mumbai University · Final Year Electronics and Telecommunication Engineering · Rev-2019 'C' Scheme
Optical Communication and Networks
ECC801 · Semester VIII · 3 credits · Internal tests 20 (average of two) + end-semester 80
End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four. Each module's share of the paper follows its lecture hours.
Module 1: Optical Fiber Communication Basics
7 hoursOptical bands and windows; cable types; the fiber link; ray and wave theory; fiber classes and modes; mode field diameter; fabrication by MCVD; joints, connectors and splices; photonic crystal fibres.
Examined in the 80-mark end-semester paper (about 18% of it, by lecture hours); the class tests cover what has been taught by then
- Optical fiber communication link
- Ray and wave theory of propagation
- Modes and V-number
- Fiber fabrication, splices and connectors
- Photonic crystal fibres
Module 2: Transmission Characteristics
7 hoursTypes of dispersion; compensation, management and measurement; absorption, radiation and scattering losses; insertion and return loss; OTDR.
Examined in the 80-mark end-semester paper (about 18% of it, by lecture hours); the class tests cover what has been taught by then
- Dispersion in optical fibers
- Dispersion compensation and management
- Attenuation in optical fibers
- OTDR
Module 3: Optical Communication Systems
7 hoursEdge-emitting LEDs and lasers; VCSELs; optical amplifiers; PIN and APD detectors; coherent and direct detection; receivers, BER, Q function and eye diagrams; link power and rise-time budgets.
Examined in the 80-mark end-semester paper (about 18% of it, by lecture hours); the class tests cover what has been taught by then
- Light emitting diodes
- Laser diodes
- VCSELs
- PIN photodiode
- Avalanche photodiode
- Bit error rate, Q function and eye diagram
- Optical power budget
- Rise time budget
Module 4: Network Components and Optical Networks
8 hoursCouplers, isolators and circulators; gratings, filters, switches and wavelength converters; add-drop multiplexers; SONET/SDH and PDH; OTN; WDM elements and access, metro and long-haul networks; data-centre networks.
Examined in the 80-mark end-semester paper (about 21% of it, by lecture hours); the class tests cover what has been taught by then
- Optical couplers, isolators and circulators
- Fibre Bragg gratings and add-drop multiplexers
- SONET and SDH
- Wavelength division multiplexing
- WDM network architectures
Module 5: Packet Switching and Access Networks
4 hoursOTDM; optical access networks and FTTH; optical burst switching.
Examined in the 80-mark end-semester paper (about 10% of it, by lecture hours); the class tests cover what has been taught by then
- Optical time division multiplexing
- Passive optical networks and FTTH
- Optical burst switching
Module 6: Network Design and Management
6 hoursTransmission models and power penalties; amplifiers and crosstalk; configuration, performance and fault management; optical safety; free-space optics.
Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then
- Power penalties and crosstalk
- Optical network management
- Free space optics
Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.