Mumbai University BE EXTC syllabus

Mumbai University · Final Year Electronics and Telecommunication Engineering · Rev-2019 'C' Scheme

Mobile Communication System

ECC702 · Semester VII · 3 credits · Internal tests 20 (average of two) + end-semester 80

End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four. Each module's share of the paper follows its lecture hours.

  1. Module 1: Fundamentals of Mobile Communication

    7 hours

    Mobile radio telephony; frequency reuse; channel assignment; interference and capacity; trunking and grade of service; improving coverage and capacity.

    Examined in the 80-mark end-semester paper (about 18% of it, by lecture hours); the class tests cover what has been taught by then

    • Cellular concept and network architecture
    • Frequency reuse, cell splitting and sectoring
    • Channel assignment and interference
    • Tele-traffic theory and the Erlang model
  2. Module 2: Mobile Radio Propagation

    8 hours

    Free-space and two-ray models; link budgets with path loss; small-scale multipath and its parameters; Rayleigh and Ricean fading; FDMA, TDMA, SSMA, SDMA, OFDMA and OFDM PAPR.

    Examined in the 80-mark end-semester paper (about 21% of it, by lecture hours); the class tests cover what has been taught by then

    • Free-space and two-ray propagation models
    • Link budget analysis
    • Small-scale fading and multipath
    • Rayleigh and Rician fading
    • Multiple access: FDMA, TDMA, SDMA and OFDMA
  3. Module 3: 2G Technologies

    8 hours

    GSM architecture, air interface, signalling, channels, frame structure, speech coding, calls, security and handoff; GPRS, HSCSD and EDGE; IS-95 CDMA, power control and the RAKE receiver.

    Examined in the 80-mark end-semester paper (about 21% of it, by lecture hours); the class tests cover what has been taught by then

    • GSM architecture and channels
    • GSM call procedures, security and handoff
    • GPRS, HSCSD and EDGE
    • IS-95 CDMA and the RAKE receiver
  4. Module 4: 3G Technologies

    5 hours

    UMTS architecture, air interface, channels and security; W-CDMA; cdma2000 channels, handoff and power control.

    Examined in the 80-mark end-semester paper (about 13% of it, by lecture hours); the class tests cover what has been taught by then

    • UMTS and W-CDMA
    • cdma2000
  5. Module 5: 3GPP LTE

    6 hours

    LTE bands, network and protocol structure; frames, slots and symbols; modulation, coding and antennas; logical and physical channels; retransmission, power control and handover.

    Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then

    • LTE network and protocol structure
    • LTE physical layer
    • LTE channels and handover
  6. Module 6: Advanced Techniques for 4G and Beyond

    5 hours

    Smart antennas and MIMO; cognitive radio and spectrum sensing; software-defined radio; 5G technologies: small cells, massive MIMO, beamforming, NOMA and mmWave.

    Examined in the 80-mark end-semester paper (about 13% of it, by lecture hours); the class tests cover what has been taught by then

    • MIMO system model
    • Cognitive radio and software defined radio
    • 5G architecture

Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.