Mumbai University BE EXTC syllabus

Mumbai University · Final Year Electronics and Telecommunication Engineering · Rev-2019 'C' Scheme

Microstrip Antenna

ECCDLO8024 · Department Optional Course 6 · Semester VIII · 3 credits · Internal tests 20 (average of two) + end-semester 80

End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four. Each module's share of the paper follows its lecture hours.

One of the Department Optional Course 6 options.

  1. Module 1: Introduction to Microstrip Antennas

    5 hours

    Types, characteristics and applications; reflection, VSWR, bandwidth, gain, directivity, efficiency, patterns, polarisation, SAR and axial ratio; feeding; substrates.

    Examined in the 80-mark end-semester paper (about 13% of it, by lecture hours); the class tests cover what has been taught by then

    • Types and characteristics of microstrip antennas
    • Antenna parameters: VSWR, gain and polarisation
    • Feeding techniques and substrates
  2. Module 2: Rectangular Microstrip Antennas

    8 hours

    Resonant frequency, fields and pattern; effective dielectric constant, length and width; feed location; parametric study; higher-order modes.

    Examined in the 80-mark end-semester paper (about 21% of it, by lecture hours); the class tests cover what has been taught by then

    • Design of rectangular microstrip antennas
    • Parametric study of RMSA
    • Higher-order modes of RMSA
  3. Module 3: Circular Microstrip Antennas

    8 hours

    Resonant frequency, input impedance and pattern; effective radius; feed location; loss tangent; higher-order modes.

    Examined in the 80-mark end-semester paper (about 21% of it, by lecture hours); the class tests cover what has been taught by then

    • Design of circular microstrip antennas
    • Higher-order modes of CMSA
  4. Module 4: Compact and Broadband Techniques

    8 hours

    Shorted and partially shorted RMSA; shorting posts; gap-coupled multiresonators; electromagnetically coupled and stacked patches; U-slots.

    Examined in the 80-mark end-semester paper (about 21% of it, by lecture hours); the class tests cover what has been taught by then

    • Compact shorted microstrip antennas
    • Broadband techniques: gap coupling and stacked patches
    • U-slot technique
  5. Module 5: Circularly Polarised MSAs

    5 hours

    Single and dual-feed circular polarisation; design of single-feed CP rectangular and circular patches.

    Examined in the 80-mark end-semester paper (about 13% of it, by lecture hours); the class tests cover what has been taught by then

    • Circular polarisation in microstrip antennas
    • Single-feed circularly polarised design
  6. Module 6: Applications

    5 hours

    Wearable and fractal antennas; MIMO patches; reconfigurable antennas; implanted antennas.

    Examined in the 80-mark end-semester paper (about 13% of it, by lecture hours); the class tests cover what has been taught by then

    • Wearable and fractal antennas
    • MIMO patch antennas
    • Implanted antennas

Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.