Mumbai University BE Electrical syllabus

Mumbai University · Final Year Electrical Engineering · Rev-2019 'C' Scheme

Power System Planning and Reliability

EEDO8021 · Department Optional Course 6 · Semester VIII · 3 credits · Internal tests 20 (average of two) + end-semester 80

End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four.

One of the Department Optional Course 6 options.

  1. Module 1: Planning and Load Forecasting

    8 hours

    Short-, medium- and long-term planning; load characteristics; extrapolation and correlation forecasting; energy, weather-sensitive and peak load forecasting.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Power system planning horizons
    • Load forecasting methods
    • Peak load and energy forecasting
  2. Module 2: Basic Concepts of Reliability

    8 hours

    Failure analysis and reliability parameters; hazard models and the bathtub curve; series and parallel systems; continuous Markov processes; frequency and duration.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Reliability parameters and the bathtub curve
    • Series and parallel systems
    • Markov processes
    • Frequency and duration approach
  3. Module 3: Generation Planning and Reliability

    8 hours

    Generation model; capacity outage probability tables; recursive algorithm with derated states; LOLE and LOEE.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Capacity outage probability table
    • Recursive algorithm with derated states
    • Loss of load expectation
    • Loss of energy expectation
  4. Module 4: Composite Generation and Transmission

    6 hours

    Radial configurations; conditional probability; network configurations; system and load-point indices.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Composite system reliability
    • Load point indices
  5. Module 5: Distribution Planning and Reliability

    6 hours

    Evaluation techniques; interruption indices; radial systems.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Distribution reliability indices
    • Reliability of radial systems
  6. Module 6: Renewable Penetration

    5 hours

    Impact of high renewable penetration on stability and reliability; PV and wind generation-loss case studies.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Impact of renewable penetration on reliability

Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.