Mumbai University BE Electrical syllabus

Mumbai University · Final Year Electrical Engineering · Rev-2019 'C' Scheme

Power System Dynamics and Control

EEDO7022 · Department Optional Course 4 · Semester VII · 3 credits · Internal tests 20 (average of two) + end-semester 80

End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four.

One of the Department Optional Course 4 options.

  1. Module 1: The Stability Problem

    3 hours

    Rotor angle and voltage stability; voltage collapse; mid- and long-term stability; classification.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Classification of power system stability
    • Rotor angle and voltage stability
  2. Module 2: Synchronous Machine Modelling

    12 hours

    Machine equations; dq0 transformation; per-unit equations; d- and q-axis equivalent circuits; steady-state phasors; three-phase short circuit; saturation; simplified and constant-flux-linkage models.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Synchronous machine equations
    • dq0 transformation
    • Per-unit synchronous machine model
    • d-q equivalent circuits
    • Synchronous machine short circuit
    • Magnetic saturation
    • Simplified models for large studies
  3. Module 3: Excitation Systems

    4 hours

    Requirements, elements and types of excitation systems; dynamic performance; control and protective functions.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Excitation system requirements
    • Types of excitation systems
    • Excitation control and protection
  4. Module 4: Small Signal Stability

    12 hours

    Stability of dynamic systems; eigen properties of the state matrix; single machine infinite bus; AVR effect on synchronising and damping torque; power system stabilisers.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Eigenvalue analysis of the state matrix
    • Small signal stability of a single machine infinite bus
    • AVR effect on synchronising and damping torque
    • Power system stabiliser
  5. Module 5: Voltage Stability

    4 hours

    Basic concepts; voltage collapse; analysis; prevention.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Voltage stability analysis
    • Prevention of voltage collapse
  6. Module 6: Improving Stability

    4 hours

    Transient and small-signal stability enhancement.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Transient stability enhancement
    • Small signal stability enhancement

Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.