Mumbai University BE Electrical syllabus

Mumbai University · Final Year Electrical Engineering · Rev-2019 'C' Scheme

Power Quality and FACTs

EEDO8011 · Department Optional Course 5 · Semester VIII · 3 credits · Internal tests 20 (average of two) + end-semester 80

End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four.

One of the Department Optional Course 5 options.

  1. Module 1: Introduction to Power Quality

    3 hours

    Disturbances; unbalance; distortion; fluctuations and flicker; quality assessment.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Power quality terms as per IEEE 1159
  2. Module 2: Harmonics and their Effects

    7 hours

    Odd and even harmonics; phase rotation; causes; IHD and THD; power under distortion; effects on machines, transformers, cables and neutrals.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Harmonic indices and THD
    • Power under non-sinusoidal conditions
    • Triplen harmonics
    • Effects of harmonics on machines, transformers and cables
  3. Module 3: Power Quality Improvement

    10 hours

    Power factor with sinusoidal and non-sinusoidal current; capacitor compensation; passive filters; shunt, series and hybrid active filters; instantaneous PQ theory.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Power factor correction with capacitors
    • Power under non-sinusoidal conditions
    • Passive and active harmonic filters
    • Instantaneous PQ theory
  4. Module 4: FACTS and Load Compensation

    8 hours

    Power flow and loading limits; controllable parameters; basic FACTS controllers and benefits; load compensation objectives and the ideal compensator.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • FACTS concepts and power flow control
    • Load compensation
  5. Module 5: Static Shunt and Series Compensators

    8 hours

    TCR, TSR, TSC and FC-TCR; converter-type VAR generators; GCSC, TSSC, TCSC and SSSC.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Static VAR generators: TCR, TSC and FC-TCR
    • STATCOM principle
    • Series compensators: GCSC, TSSC, TCSC and SSSC
  6. Module 6: Voltage and Phase Angle Regulators

    3 hours

    Objectives; TCVR and TCPAR.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Voltage and phase angle regulators: TCVR and TCPAR

Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.