Mumbai University BE Electrical syllabus

Mumbai University · Final Year Electrical Engineering · Rev-2019 'C' Scheme

HVDC Transmission Systems

EEDO7012 · Department Optional Course 3 · Semester VII · 3 credits · Internal tests 20 (average of two) + end-semester 80

End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four.

One of the Department Optional Course 3 options.

  1. Module 1: Introduction to HVDC

    5 hours

    AC versus DC transmission; classes of HVDC link; components; ground return; advances; HVDC for wind power.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • HVDC versus EHVAC transmission
    • Classification of HVDC links
    • Components of an HVDC system
  2. Module 2: Analysis of the Bridge Rectifier

    12 hours

    Six-pulse converter with grid control, with and without overlap; AC–DC relations; rectifier and inverter operation and waveforms; equivalent circuits; multi-bridge converters.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Graetz bridge and HVDC power flow
    • Six-pulse converter with overlap
    • Rectifier and inverter operation
    • Equivalent circuit of rectifier and inverter
    • Multi-bridge converters
  3. Module 3: HVDC System Control

    6 hours

    Constant current versus constant voltage control; actual control characteristics; current margin; power reversal; implementation.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • HVDC converter control: CIA, CC and CEA
    • Current margin and power reversal
  4. Module 4: Converter Control

    4 hours

    Equidistant and individual phase firing control; starting and shutting down a link.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Firing control: EPC and IPC
    • Starting and stopping an HVDC link
  5. Module 5: Faults and Protection

    8 hours

    Bypass valves; arc-back, arc-through, misfire, current extinction and commutation failures; converter short circuits; overcurrent and overvoltage protection.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • HVDC protection
    • Converter faults: arc-back, misfire and commutation failure
  6. Module 6: Harmonics and Filters

    4 hours

    Characteristic and uncharacteristic harmonics; their effects and reduction; AC and DC filters.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Twelve-pulse converters and harmonics
    • AC and DC filters

Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.