Mumbai University · Final Year Electrical Engineering · Rev-2019 'C' Scheme
Electrical Power System III
EEC702 · Semester VII · 3 credits · Internal tests 20 (average of two) + end-semester 80
End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four.
Module 1: Economic Operation
10 hoursHeat-rate, input–output and IFC curves; scheduling without and with losses; the exact coordination equation and B-coefficients; unit commitment.
Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then
- Incremental cost curves
- Economic dispatch by Lagrange multipliers
- Penalty factor and B-coefficients
- Unit commitment constraints
Module 2: Power System Stability I
5 hoursTypes of stability; the power-angle curve; synchronous machine dynamics; steady-state stability.
Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then
- Steady state, transient and dynamic stability
- Power angle curve
- Swing equation
Module 3: Power System Stability II
5 hoursSwing equation and transient stability; equal area criterion and its applications; improving transient stability.
Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then
- Equal area criterion
- Critical clearing angle
- Methods to improve stability
Module 4: Load Flow Studies
8 hoursForming the Y-bus; the load flow problem; Gauss–Seidel, Newton–Raphson, decoupled and fast decoupled methods compared.
Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then
- Formation of the Y-bus matrix
- Gauss-Seidel load flow
- Newton-Raphson load flow
- Decoupled and fast decoupled load flow
Module 5: Automatic Generation and Voltage Control
6 hoursGenerator control loops and the AVR; speed governing, turbine and power system transfer functions; single-area load frequency control, steady-state and dynamic response.
Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then
- Automatic voltage regulator
- Speed governing and turbine models
- Load frequency control of an isolated system
- Steady state and dynamic response of LFC
Module 6: Security and Interchange of Power
5 hoursSystem states, security and contingency analysis; interchange between utilities; capacity and diversity interchange; energy banking; power pools.
Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then
- Power system security and contingency analysis
- Interchange of power between utilities
- Types of interchange and energy banking
- Power pools
Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.