Mumbai University · Final Year Electrical Engineering · Rev-2019 'C' Scheme
Electric Vehicle System Design
EEDO8024 · Department Optional Course 6 · Semester VIII · 3 credits · Internal tests 20 (average of two) + end-semester 80
End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four.
One of the Department Optional Course 6 options.
Module 1: Selecting and Sizing EV Motors
7 hoursVehicle modelling and tractive force; 2W and 4W design; torque, power and speed; traction, acceleration and grade limits; power demand over driving cycles.
Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then
- Vehicle forces and power calculation
- Sizing the motor and converter
- Driving cycles and vehicle power demand
Module 2: Selecting and Sizing Energy Storage
8 hoursBattery pack type and sizing for range; effects of road, environment and traffic; fuel-cell sizing for FCEVs; battery–ultracapacitor hybrids.
Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then
- Battery pack design
- Range and battery sizing
- Fuel cell sizing for FCEVs
- Battery-ultracapacitor hybrids
Module 3: Automotive Subsystems
6 hoursECUs and their communication; acceleration, braking and regenerative braking control; steering; HVAC controllers.
Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then
- ECUs and in-vehicle communication
- CAN in vehicles
- Regenerative braking control
Module 4: EV System Integration
4 hoursEMC design at ECU and system level; radiated and conducted emissions; EMI/EMC measurement.
Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then
- EMC design for EVs
Module 5: Design of EV Chargers
8 hoursAC charger interface and protocols; on-board charger topology and control; DC fast charger design; charging standards.
Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then
- On-board charger design
- DC fast charger design
- Charging infrastructure guidelines
Module 6: Functional Safety
6 hoursFunctional safety requirements; ASIL and ISO 26262; storage integrity, gas and thermal events, stranding, unintended movement and shock protection.
Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then
- Functional safety and ISO 26262
- Battery safety and thermal runaway
Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.