Mumbai University · Final Year Electrical Engineering · Rev-2019 'C' Scheme
Digital Signal Processors and Applications
EEDO7014 · Department Optional Course 3 · Semester VII · 3 credits · Internal tests 20 (average of two) + end-semester 80
End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four.
One of the Department Optional Course 3 options.
Module 1: Introduction
5 hoursDSP and DSC architectures; fixed and floating point; DSPs used in power and control; the TMS320C2000 family.
Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then
- DSP and DSC architectures
- Fixed and floating point representation
- TMS320C2000 processors
Module 2: DSC Architecture, Peripherals and Programming
8 hoursC2000 architecture, memory map and clock; digital I/O and CPU timers; ADC, PWM, capture, QEP and communication ports; Code Composer Studio; generating PWM and sine PWM; measuring voltages and currents.
Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then
- C2000 peripherals: ADC, PWM, capture and QEP
- Code Composer Studio
- Generating PWM and sine PWM
- Measuring AC and DC quantities with a DSC
Module 3: Mathematical Tools for Real-time DSP
5 hoursExplicit and implicit Euler, Heun's and trapezoidal integration; implementing digital filters and transformations.
Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then
- Numerical integration for real-time control
- Euler, Heun's and trapezoidal methods
- Implementing digital filters
Module 4: Digital Controller Design
7 hoursModelling buck and boost converters and the three-phase inverter with LC filter; voltage- and current-mode compensators; PI, Type II and Type III controllers.
Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then
- Modelling buck and boost converters
- Modelling inverters with LC filters
- Voltage and current mode control
- PI, Type II and Type III compensators
Module 5: Applications in Power Systems and Power Electronics
10 hoursActive filters under balanced and unbalanced conditions; harmonic oscillators and three-phase PLLs; static VAR compensators; induction motor speed control.
Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then
- Active filters with a DSC
- Phase-locked loops
- DSP control of static VAR compensators
- DSP speed control of induction motors
Module 6: DSP-based System Design
4 hoursA DSP-controlled solar PV converter and inverter for standalone and grid-connected modes.
Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then
- DSP-controlled solar PV systems
Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.