Mumbai University BE Electrical syllabus

Mumbai University · Final Year Electrical Engineering · Rev-2019 'C' Scheme

Cyber Physical Systems

EEDO8023 · Department Optional Course 6 · Semester VIII · 3 credits · Internal tests 20 (average of two) + end-semester 80

End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four.

One of the Department Optional Course 6 options.

All notes for this subject
  1. Module 1: Introduction

    6 hours

    CPS in the real world; design and validation principles; processors, sensors, actuators and networks; the software stack and RTOS; scheduling real-time control tasks.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Cyber-physical systems in the real world
    • CPS hardware platforms
    • CPS software stack and RTOS
    • Scheduling real-time control tasks
  2. Module 2: CPS Hardware Platforms

    8 hours

    Embedded and hybrid systems; control theory; computer-aided verification and synthesis; complex networks; programming models; transport, medical and aerospace applications.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Embedded and hybrid systems
    • Computer-aided verification and synthesis
    • CPS application areas
  3. Module 3: CPS Software Components

    6 hours

    Mapping software to ECUs; effects of scheduling, bus latency, faults and congestion on control.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Mapping software to ECUs
    • Effect of scheduling and bus latency on control
    • Sensing and actuation faults
  4. Module 4: Automated Control Design

    6 hours

    Dynamical systems and stability; controller design; CLFs and MLFs; slow switching; performance under packet drops and noise.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Stability of dynamical systems
    • Lyapunov functions and switching
    • Control under packet drops and noise
  5. Module 5: Safety Assurance

    8 hours

    Timed and hybrid automata; trajectories and Zenoness; flow-pipe construction and reachability; weakest preconditions; bounded model checking.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Timed and hybrid automata
    • Reachability analysis
    • Bounded model checking
  6. Module 6: Secure Deployment

    5 hours

    Attack models; secure task mapping; state estimation for attack detection; vehicle ABS and smart grid attacks.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Attack models for CPS
    • Attack detection by state estimation
    • Attacks on smart grids and vehicles

Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.