Mumbai University · Final Year Civil Engineering · Rev-2019 'C' Scheme
Transportation System Engineering
CEDLO8023 · Department Optional Course 6 · Semester VIII · 3 credits · Internal tests 20 (average of two) + end-semester 80
End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four. Each module's share of the paper follows its lecture hours.
One of the Department Optional Course 6 options.
Module 1: Transportation Systems
5 hoursModes and their roles in India; Mumbai's public transport; National Urban Transport Policy; sustainable transport and TOD; environmental guidelines and EIA.
Examined in the 80-mark end-semester paper (about 13% of it, by lecture hours); the class tests cover what has been taught by then
- Modes of transportation
- Urban transport policy and TOD
- Environmental guidelines for transport projects
Module 2: Air Transportation
10 hoursAircraft; airport sites, zoning and obstructions; terminals and gates; aprons and taxiways; runway orientation and length corrections; hangars and drainage; lighting, marking and air traffic aids; heliports.
Examined in the 80-mark end-semester paper (about 26% of it, by lecture hours); the class tests cover what has been taught by then
- Airport site selection and zoning
- Terminal buildings and aprons
- Runway orientation and length
- Airport lighting and air traffic control
- Heliports
Module 3: Rail Transportation
8 hoursAlignment and surveys; track components; gradients, curves, cant and turnouts; yards, signalling and interlocking; maglev, metro, monorail and high-speed rail.
Examined in the 80-mark end-semester paper (about 21% of it, by lecture hours); the class tests cover what has been taught by then
- Railway track components
- Railway geometrics: gradients, curves and cant
- Turnouts
- Signalling and interlocking
- Metro, monorail and high-speed rail
Module 4: Water Transportation
4 hoursHarbours, breakwaters, jetties, fenders, wharves and dolphins; wet, dry and floating docks; port facilities and cargo handling.
Examined in the 80-mark end-semester paper (about 10% of it, by lecture hours); the class tests cover what has been taught by then
- Harbours and breakwaters
- Docks and port facilities
Module 5: Public Transportation
6 hoursPara-transit, street and rapid transit; routes, stops and schedules; capacity of transit systems.
Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then
- Public transit systems
- Transit routes and schedules
- Transit capacity
Module 6: Bridge Engineering
6 hoursHistory and classification; components and requirements; site and alignment; loads; low-cost bridges.
Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then
- Classification and components of bridges
- Low-cost bridges
Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.