Mumbai University BE Civil syllabus

Mumbai University · Final Year Civil Engineering · Rev-2019 'C' Scheme

Structural Dynamics

CEDLO8025 · Department Optional Course 6 · Semester VIII · 3 credits · Internal tests 20 (average of two) + end-semester 80

End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four.

One of the Department Optional Course 6 options.

  1. Module 1: Introduction

    4 hours

    The basic problem of dynamics; static versus dynamic loads; types of dynamic loads.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Static and dynamic loads
  2. Module 2: SDOF Systems

    8 hours

    Undamped vibration, natural frequency and period; viscous and Coulomb damping; logarithmic decrement; periodic and pulse loading and the dynamic load factor; Duhamel's integral; springs in series and parallel.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Modelling SDOF systems
    • Free vibration of SDOF systems
    • Damping and its types
    • Forced vibration of SDOF systems
    • Duhamel's integral
  3. Module 3: Distributed Mass Systems

    4 hours

    Distributed mass idealised as SDOF; Rayleigh's method; response to ground motion.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Rayleigh's method
    • Response to ground motion
  4. Module 4: Two-DOF Systems

    9 hours

    Coupled and uncoupled systems; frequencies and mode shapes; orthogonality; initial conditions; energy methods.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • MDOF systems
    • Eigenvalues and mode shapes
    • Orthogonality of modes
  5. Module 5: Earthquake Analysis

    8 hours

    Seismicity and causes of earthquakes; intensity and the Richter scale; seismographs; modal analysis for ground motion; response spectrum method.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Causes of earthquakes and seismic waves
    • Magnitude and intensity
    • Response spectrum analysis
  6. Module 6: IS Code Provisions

    6 hours

    IS 1893 for buildings; seismic coefficient method and its limits; time history analysis.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • IS 1893 provisions
    • Equivalent static analysis
    • Time history analysis

Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.