Mumbai University · Final Year Civil Engineering · Rev-2019 'C' Scheme
Soil Dynamics
CEDLO8016 · Department Optional Course 5 · Semester VIII · 3 credits · Internal tests 20 (average of two) + end-semester 80
End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four.
One of the Department Optional Course 5 options.
Module 1: Introduction
4 hoursSimple harmonic motion and wave types; degrees of freedom; dynamic soil properties to IS 4249; dynamic loads.
Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then
- Vibration and degrees of freedom
- Types of dynamic loading
- Dynamic soil properties
Module 2: Wave Propagation
5 hoursWaves in elastic rods, finite media and half-spaces; waves from surface footings.
Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then
- Wave propagation in elastic media
- Waves generated by surface footings
Module 3: Liquefaction
8 hoursLiquefaction and its criteria and factors; triaxial and field studies; liquefaction potential by analytical and SPT methods.
Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then
- Liquefaction of soils
- Factors affecting liquefaction
- Liquefaction potential from SPT
Module 4: Machine Foundations
6 hoursDesign principles and criteria; degrees of freedom of block foundations; vertical and sliding vibration; codal provisions.
Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then
- Design criteria for machine foundations
- Degrees of freedom of a block foundation
- Vertical and sliding vibration of block foundations
- Codal provisions for machine foundations
Module 5: Dynamic Behaviour of Machine Foundations
5 hoursSoil mass in vibration; vibration isolation and screening; improving distressed foundations.
Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then
- Mass of soil participating in vibration
- Vibration isolation and screening
- Improving distressed machine foundations
Module 6: Dynamic Properties and Retaining Walls
11 hoursField and laboratory tests for dynamic properties; elastic uniform shear, spring constant and damping; dynamic earth pressure on gravity and reinforced walls.
Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then
- Field tests for dynamic soil properties
- Spring constant and damping of soils
- Dynamic earth pressure on retaining walls
Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.