Mumbai University · Final Year Civil Engineering · Rev-2019 'C' Scheme
Repairs, Rehabilitation and Retrofitting of Structures
CEDLO8021 · Department Optional Course 6 · Semester VIII · 3 credits · Internal tests 20 (average of two) + end-semester 80
End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four. Each module's share of the paper follows its lecture hours.
One of the Department Optional Course 6 options.
Module 1: Introduction
3 hoursNeed for repair and maintenance; repair management; life-cycle cost; heritage structures.
Examined in the 80-mark end-semester paper (about 8% of it, by lecture hours); the class tests cover what has been taught by then
- Repair versus retrofitting
- Maintenance and life-cycle cost
Module 2: Damage Assessment
8 hoursPhysical, chemical and mechanical deterioration; visual inspection; rebound hammer, UPV and semi-destructive tests; carbonation and corrosion testing; types of cracks and their measurement.
Examined in the 80-mark end-semester paper (about 21% of it, by lecture hours); the class tests cover what has been taught by then
- Causes of damage to structures
- NDT for distressed structures
- Types of cracks and crack measurement
Module 3: Repair of Concrete
6 hoursEpoxy injection, routing, stitching and other crack repairs; repair materials, bonding agents, grouts and coatings; cathodic protection and chloride removal.
Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then
- Crack repair methods
- Repair materials
- Cathodic protection
Module 4: Rehabilitation and Retrofitting
10 hoursRepair stages; mortars and epoxy; shotcrete, ferrocement, plate bonding, jacketing and fibre wraps; shoring and underpinning; slab jacking.
Examined in the 80-mark end-semester paper (about 26% of it, by lecture hours); the class tests cover what has been taught by then
- Jacketing and shotcrete
- Ferrocement and adding new members
- Fibre-reinforced polymers
- Shoring and underpinning
Module 5: Repair of Steel Structures
6 hoursDeterioration and prevention; brittle fracture, lamellar tearing and weld defects; design, fabrication and erection errors; repairs.
Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then
- Corrosion in RC and steel structures
- Defects and repair of steel structures
Module 6: Seismic Retrofitting and Heritage
6 hoursEarthquake damage and seismic retrofitting; restoring buildings; care of heritage structures.
Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then
- Base isolation
- Retrofitting masonry and heritage structures
Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.