Mumbai University BE Civil syllabus

Mumbai University · Final Year Civil Engineering · Rev-2019 'C' Scheme

Pre-stressed Concrete

CEDLO7011 · Department Optional Course 3 · Semester VII · 3 credits · Internal tests 20 (average of two) + end-semester 80

End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four. Each module's share of the paper follows its lecture hours.

One of the Department Optional Course 3 options.

  1. Module 1: Introduction

    2 hours

    Principle of prestressing; high-strength concrete and steel; techniques and systems; advantages.

    Examined in the 80-mark end-semester paper (about 5% of it, by lecture hours); the class tests cover what has been taught by then

    • Concept of prestressing
    • Prestressing systems and anchorages
  2. Module 2: Analysis of Prestressed Beams

    10 hours

    Loading stages and permissible stresses at transfer and service; stress method; load balancing and cable profile; kern points, pressure line and efficiency; internal resisting couple.

    Examined in the 80-mark end-semester paper (about 26% of it, by lecture hours); the class tests cover what has been taught by then

    • Stress analysis of prestressed members
    • Load balancing method
    • Kern points and pressure line
    • Cable profiles
  3. Module 3: Losses in Prestress

    6 hours

    Elastic shortening, creep, shrinkage, relaxation, anchorage slip and friction.

    Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then

    • Losses of prestress
  4. Module 4: Deflection

    4 hours

    Deflection at transfer; short- and long-term deflection of uncracked beams; limits.

    Examined in the 80-mark end-semester paper (about 10% of it, by lecture hours); the class tests cover what has been taught by then

    • Deflection of prestressed beams
  5. Module 5: Limit State of Collapse

    10 hours

    Principal tension and design for shear in uncracked sections; analysis and design for flexure.

    Examined in the 80-mark end-semester paper (about 26% of it, by lecture hours); the class tests cover what has been taught by then

    • Shear design of prestressed beams
    • Design of prestressed beams for flexure
  6. Module 6: Design for Serviceability

    7 hours

    Section modulus requirements; optimum prestress and eccentricity; safe cable zone.

    Examined in the 80-mark end-semester paper (about 18% of it, by lecture hours); the class tests cover what has been taught by then

    • Optimum prestressing force and eccentricity
    • Safe cable zone

Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.