Mumbai University BE Civil syllabus

Mumbai University · Final Year Civil Engineering · Rev-2019 'C' Scheme

Physico-chemical Treatment of Water and Wastewater

CEDLO8022 · Department Optional Course 6 · Semester VIII · 3 credits · Internal tests 20 (average of two) + end-semester 80

End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four. Each module's share of the paper follows its lecture hours.

One of the Department Optional Course 6 options.

  1. Module 1: Quality and Quantity

    6 hours

    Characteristics of water and wastewater; conventional treatment; sampling; wastewater flows; reducing water use; reclamation and reuse.

    Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then

    • Water quality and IS 10500
    • Wastewater characteristics and standards
    • Wastewater reclamation and reuse
  2. Module 2: Preliminary Treatment

    6 hours

    Screens and head loss; grit chambers and Stokes' law; skimming tanks and flotation.

    Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then

    • Screens and grit chambers
    • Skimming tanks and flotation
  3. Module 3: Primary Treatment

    8 hours

    Sedimentation zones, design and tube settlers; filtration mechanisms and hydraulics; rapid sand filter design and washing.

    Examined in the 80-mark end-semester paper (about 21% of it, by lecture hours); the class tests cover what has been taught by then

    • Sedimentation and settling tanks
    • Tube settlers
    • Rapid sand filters
  4. Module 4: Chemical Unit Processes

    6 hours

    Coagulation, coagulant aids and polyelectrolytes; flash mixer design; flocculators and power requirement.

    Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then

    • Coagulation and flocculation
    • Design of flash mixers and flocculators
  5. Module 5: Advanced Physico-chemical Processes

    8 hours

    Softening; precipitation; desalination and reverse osmosis; disinfection by chlorine and UV; heavy metal removal; oxidation; adsorption and ion exchange; membranes and activated carbon.

    Examined in the 80-mark end-semester paper (about 21% of it, by lecture hours); the class tests cover what has been taught by then

    • Softening and desalination
    • Disinfection and chlorination
    • Adsorption and ion exchange
    • Membrane filtration
  6. Module 6: Sludge Dewatering and Disposal

    5 hours

    Sources and density of sludge; thickening, conditioning and elutriation; vacuum and pressure filtration; sludge drying beds.

    Examined in the 80-mark end-semester paper (about 13% of it, by lecture hours); the class tests cover what has been taught by then

    • Sludge thickening and conditioning
    • Sludge drying beds

Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.