Mumbai University BE Civil syllabus

Mumbai University · Final Year Civil Engineering · Rev-2019 'C' Scheme

Pavement Materials, Construction and Maintenance

CEDLO7016 · Department Optional Course 3 · Semester VII · 3 credits · Internal tests 20 (average of two) + end-semester 80

End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four. Each module's share of the paper follows its lecture hours.

One of the Department Optional Course 3 options.

  1. Module 1: Soil

    5 hours

    Soil classification including HRB; CBR and lateral confinement; modulus of subgrade reaction; static and cyclic plate load tests and their corrections.

    Examined in the 80-mark end-semester paper (about 13% of it, by lecture hours); the class tests cover what has been taught by then

    • Soil classification for highways
    • CBR and modulus of subgrade reaction
    • Plate load tests for pavements
  2. Module 2: Stresses in Soil and Stabilised Soils

    8 hours

    Elastic and plastic behaviour; cyclic triaxial tests and resilient modulus; sampling and testing stabilised soils; soil–bitumen, soil–lime and soil–fly ash mixes.

    Examined in the 80-mark end-semester paper (about 21% of it, by lecture hours); the class tests cover what has been taught by then

    • Resilient modulus of subgrade soils
    • Stabilised soils and their testing
    • Soil-lime and soil-fly ash mixes
  3. Module 3: Aggregates

    4 hours

    Classification and requirements; blending; shape factors; grading; base and sub-base materials.

    Examined in the 80-mark end-semester paper (about 10% of it, by lecture hours); the class tests cover what has been taught by then

    • Road aggregates and blending
    • Base and sub-base materials
  4. Module 4: Bitumen and Bituminous Mix Design

    9 hours

    Binder requirements and temperature susceptibility; emulsions and cutbacks; fillers, polymers and rubber-modified bitumen; anti-stripping agents; bituminous surfaces; Marshall stability; skid resistance.

    Examined in the 80-mark end-semester paper (about 23% of it, by lecture hours); the class tests cover what has been taught by then

    • Bituminous binders and modified bitumen
    • Emulsions and cutbacks
    • Marshall mix design
    • Types of bituminous surfaces
  5. Module 5: Evaluation, Construction and Quality

    9 hours

    Flexible and rigid pavement distresses; serviceability index, roughness, Benkelman beam and skid resistance; WBM, bituminous and concrete road construction; QC and QA; low-cost rural roads.

    Examined in the 80-mark end-semester paper (about 23% of it, by lecture hours); the class tests cover what has been taught by then

    • Pavement distresses
    • Pavement evaluation: roughness and Benkelman beam
    • Construction of WBM, bituminous and concrete roads
    • Quality control of pavements
    • Low-cost rural roads
  6. Module 6: Superpave

    4 hours

    Selecting Superpave ingredients; gyratory compaction; RTFO, PAV, rotational viscometer, DSR, BBR and direct tension tests; performance-grade binders; Superpave versus Marshall.

    Examined in the 80-mark end-semester paper (about 10% of it, by lecture hours); the class tests cover what has been taught by then

    • Superpave mix design
    • Performance-grade binders

Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.