Mumbai University BE Civil syllabus

Mumbai University · Final Year Civil Engineering · Rev-2019 'C' Scheme

Pavement Design

CEDLO8014 · Department Optional Course 5 · Semester VIII · 3 credits · Internal tests 20 (average of two) + end-semester 80

End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four. Each module's share of the paper follows its lecture hours.

One of the Department Optional Course 5 options.

  1. Module 1: Introduction

    4 hours

    Types and attributes of pavements; factors in design; highway and airport wheel loads.

    Examined in the 80-mark end-semester paper (about 10% of it, by lecture hours); the class tests cover what has been taught by then

    • Types of pavements
    • Factors affecting pavement design
    • Wheel loads for highways and airports
  2. Module 2: Stresses in Pavements

    6 hours

    One-, two- and three-layer theories; EWLF and ESWL; load and temperature stresses in rigid pavements.

    Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then

    • Layered theory of flexible pavements
    • ESWL and equivalent wheel load factors
    • Stresses in rigid pavements
  3. Module 3: Flexible Pavement Design

    8 hours

    Empirical and CBR methods to IRC 37 (1970–2018); Road Note 29, AASHTO and Asphalt Institute methods; fatigue and rutting; design software.

    Examined in the 80-mark end-semester paper (about 21% of it, by lecture hours); the class tests cover what has been taught by then

    • Flexible pavement design to IRC 37
    • AASHTO and Asphalt Institute methods
    • Fatigue and rutting criteria
  4. Module 4: Rigid Pavement Design

    8 hours

    Westergaard's, Bradbury's and Pickett's analyses; IRC 58 design steps; joints; design software.

    Examined in the 80-mark end-semester paper (about 21% of it, by lecture hours); the class tests cover what has been taught by then

    • Westergaard's analysis
    • Rigid pavement design to IRC 58
    • Joints in concrete pavements
  5. Module 5: Airport Pavements

    8 hours

    Aircraft loading, gear and tyre pressure; Corps of Engineers, FAA, CDOT, Asphalt Institute and PCA methods; joints and reinforcement.

    Examined in the 80-mark end-semester paper (about 21% of it, by lecture hours); the class tests cover what has been taught by then

    • Aircraft loads on pavements
    • Airport pavement design methods
  6. Module 6: Overlays and Pavement Management

    5 hours

    Flexible and rigid overlays to IRC 81; components of pavement management systems.

    Examined in the 80-mark end-semester paper (about 13% of it, by lecture hours); the class tests cover what has been taught by then

    • Overlay design to IRC 81
    • Pavement management systems

Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.