Mumbai University · Final Year Civil Engineering · Rev-2019 'C' Scheme
Industrial Waste Treatment
CEDLO8015 · Department Optional Course 5 · Semester VIII · 3 credits · Internal tests 20 (average of two) + end-semester 80
End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four. Each module's share of the paper follows its lecture hours.
One of the Department Optional Course 5 options.
Module 1: Industrial Wastes and their Effects
6 hoursSources and types of industrial wastewater; effects on streams and treatment plants; population equivalent; characterisation; toxicity and bioassays; regulation; BOD.
Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then
- Sources and characteristics of industrial wastewater
- Population equivalent
- Toxicity and bioassay tests
Module 2: Stream Protection
6 hoursStream and effluent standards; stream sampling and sanitation; zones of pollution; oxygen sag curve and the Streeter–Phelps equation.
Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then
- Stream and effluent standards
- Oxygen sag curve and Streeter-Phelps equation
Module 3: Waste Minimisation
6 hoursVolume and strength reduction; equalisation, neutralisation, proportioning and precipitation; coagulation and flocculation; flotation and oil separation.
Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then
- Volume and strength reduction
- Equalisation and neutralisation
- Flotation and oil separation
Module 4: Treatment Methods
6 hoursPonds, lagoons, UASB and RBC; sludge dewatering; membranes and centrifuges; advanced treatment: chemostat, soil biotechnology, reed beds and ozonation.
Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then
- Aerobic and anaerobic treatment of industrial waste
- Sludge dewatering
- Advanced treatment technologies
Module 5: Industry Case Studies
10 hoursProcesses, effluents, ETPs and by-product recovery for sugar, distillery, tannery, dairy, paper and pulp and electroplating industries.
Examined in the 80-mark end-semester paper (about 26% of it, by lecture hours); the class tests cover what has been taught by then
- Sugar and distillery waste treatment
- Tannery and dairy waste treatment
- Paper, pulp and electroplating waste treatment
Module 6: Legal Aspects and Common Facilities
5 hoursEIA and environmental audit for industries; common effluent treatment plants.
Examined in the 80-mark end-semester paper (about 13% of it, by lecture hours); the class tests cover what has been taught by then
- Environmental audit for industries
- Common effluent treatment plants
Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.