Mumbai University BE Civil syllabus

Mumbai University · Final Year Civil Engineering · Rev-2019 'C' Scheme

Ground Water Engineering

CEDLO8026 · Department Optional Course 6 · Semester VIII · 3 credits · Internal tests 20 (average of two) + end-semester 80

End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four. Each module's share of the paper follows its lecture hours.

One of the Department Optional Course 6 options.

  1. Module 1: Hydrogeological Parameters

    6 hours

    Water-bearing rocks and aquifers; permeability, specific yield, transmissivity and storage coefficient; GEC norms; Darcy's law and groundwater velocity; Dupuit–Forchheimer; steady radial flow to wells.

    Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then

    • Types of aquifers
    • Aquifer properties
    • Darcy's law and Dupuit-Forchheimer assumptions
    • Steady radial flow to wells
  2. Module 2: Well Hydraulics

    8 hours

    Unsteady flow by Theis, Jacob and Chow; Theis recovery; bailer and slug tests; image wells; partial penetration and well losses; specific capacity and safe yield; collector wells and infiltration galleries.

    Examined in the 80-mark end-semester paper (about 21% of it, by lecture hours); the class tests cover what has been taught by then

    • Theis and Jacob methods
    • Recovery, bailer and slug tests
    • Image well theory
    • Well losses and specific capacity
    • Collector wells and infiltration galleries
  3. Module 3: Groundwater Management Models

    6 hours

    Need and data for management; groundwater balance; model conceptualisation, boundary conditions, calibration, validation, prediction and sensitivity.

    Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then

    • Groundwater balance
    • Groundwater modelling
  4. Module 4: Groundwater Quality

    7 hours

    Groundwater chemistry and standards for drinking, industrial and irrigation use; pollution, legislation and regulation.

    Examined in the 80-mark end-semester paper (about 18% of it, by lecture hours); the class tests cover what has been taught by then

    • Groundwater chemistry and quality standards
    • Groundwater pollution
  5. Module 5: Groundwater Conservation

    5 hours

    Artificial recharge; soil aquifer treatment; aquifer storage and recovery; seawater intrusion; protection zones and remediation.

    Examined in the 80-mark end-semester paper (about 13% of it, by lecture hours); the class tests cover what has been taught by then

    • Artificial recharge
    • Seawater intrusion
  6. Module 6: Basin Management

    7 hours

    Basin management and investigations; conjunctive use; basin yields.

    Examined in the 80-mark end-semester paper (about 18% of it, by lecture hours); the class tests cover what has been taught by then

    • Groundwater basin management
    • Conjunctive use

Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.