Mumbai University BE Civil syllabus

Mumbai University · Final Year Civil Engineering · Rev-2019 'C' Scheme

Ground Improvement Techniques

CEDLO7023 · Department Optional Course 4 · Semester VII · 3 credits · Internal tests 20 (average of two) + end-semester 80

End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four.

One of the Department Optional Course 4 options.

  1. Module 1: Introduction

    7 hours

    Problematic soils: expansive, collapsible, soft, organic, loose and liquefiable soils, karst and fills; need, control and classification of ground improvement; selection factors; IS 13094; emerging trends.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Problematic soils
    • Classification of ground improvement techniques
    • Selecting a ground improvement technique
  2. Module 2: Compaction and Consolidation

    7 hours

    Shallow compaction and the compaction curve; dynamic compaction and replacement; vibro-compaction and vibro-replacement; blasting; preloading; sand drains for free and equal strain and their layout; PVDs.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Shallow compaction
    • Dynamic compaction
    • Vibroflotation and vibro-replacement
    • Preloading and sand drains
    • Prefabricated vertical drains
  3. Module 3: Soil Stabilisation

    5 hours

    Mechanical, lime, cement, fly ash, bitumen, chemical and polymer stabilisation; electrokinetic stabilisation.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Mechanical stabilisation
    • Lime, cement and fly ash stabilisation
    • Chemical and electrokinetic stabilisation
  4. Module 4: Grouting

    6 hours

    Grouting technology and materials; permeability and groutability; particulate and chemical grouts; limits of groutability; applications; IS 14343.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Grout materials and groutability
    • Particulate and chemical grouts
    • Applications of grouting
  5. Module 5: Stone Columns

    7 hours

    Design parameters: diameter, pattern, spacing, replacement ratio and stress concentration; failure mechanisms; unit-cell capacity; reduced-stress settlement; installation methods; IS 15284-1.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Design of stone columns
    • Load capacity and settlement of stone columns
    • Installation of stone columns
  6. Module 6: Reinforced Earth and Anchors

    7 hours

    Reinforced earth by Mohr circle analysis; geosynthetics and their functions; soil nailing and ground anchors; strip anchors by Mononobe–Okabe.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Reinforced earth
    • Functions of geosynthetics
    • Soil nailing and ground anchors

Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.