Mumbai University BE Civil syllabus

Mumbai University · Final Year Civil Engineering · Rev-2019 'C' Scheme

Green Building Constructions

CEDLO7024 · Department Optional Course 4 · Semester VII · 3 credits · Internal tests 20 (average of two) + end-semester 80

End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four. Each module's share of the paper follows its lecture hours.

One of the Department Optional Course 4 options.

All notes for this subject
  1. Module 1: Introduction

    3 hours

    Environmental impact of buildings; sustainable development; green building features and benefits; examples.

    Examined in the 80-mark end-semester paper (about 8% of it, by lecture hours); the class tests cover what has been taught by then

    • Environmental impact of buildings
    • Features and benefits of green buildings
  2. Module 2: Site Selection, Planning and Design

    8 hours

    Site preservation; passive architecture; erosion control; topography and vegetation; tree preservation; heat islands; optimised structural design; design innovation.

    Examined in the 80-mark end-semester paper (about 21% of it, by lecture hours); the class tests cover what has been taught by then

    • Site selection and preservation
    • Passive architecture
    • Heat island reduction
    • Optimisation in structural design
  3. Module 3: Water Conservation and Energy Efficiency

    10 hours

    Rainwater harvesting; efficient fixtures and irrigation; wastewater reuse; water metering; minimum and enhanced energy efficiency; commissioning; on-site and off-site renewables; energy metering.

    Examined in the 80-mark end-semester paper (about 26% of it, by lecture hours); the class tests cover what has been taught by then

    • Rainwater harvesting
    • Water-efficient fixtures and wastewater reuse
    • Energy efficiency in buildings
    • Renewable energy in buildings
    • Commissioning and energy metering
  4. Module 4: Materials and Indoor Environmental Quality

    10 hours

    Sustainable and certified materials; waste segregation; fresh-air ventilation and CO2 monitoring; daylighting; low-emitting materials; occupant well-being; indoor air quality testing and management.

    Examined in the 80-mark end-semester paper (about 26% of it, by lecture hours); the class tests cover what has been taught by then

    • Sustainable building materials
    • Ventilation and CO2 monitoring
    • Daylighting
    • Indoor air quality
  5. Module 5: Rating Systems

    4 hours

    Green building rating systems; the IGBC system, certification process and checklist.

    Examined in the 80-mark end-semester paper (about 10% of it, by lecture hours); the class tests cover what has been taught by then

    • Green building rating systems
    • IGBC rating and certification
  6. Module 6: Green Audit and Retrofitting

    4 hours

    Pre-audit, on-site audit and reports; a case study; green retrofits of lighting, HVAC, windows and roofs.

    Examined in the 80-mark end-semester paper (about 10% of it, by lecture hours); the class tests cover what has been taught by then

    • Green building audit
    • Green retrofitting

Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.