Mumbai University BE Civil syllabus

Mumbai University · Final Year Civil Engineering · Rev-2019 'C' Scheme

Foundation Analysis and Design

CEDLO7021 · Department Optional Course 4 · Semester VII · 3 credits · Internal tests 20 (average of two) + end-semester 80

End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four. Each module's share of the paper follows its lecture hours.

One of the Department Optional Course 4 options.

  1. Module 1: Stresses in Soils

    4 hours

    Boussinesq and Westergaard theories; Newmark's chart; applications.

    Examined in the 80-mark end-semester paper (about 10% of it, by lecture hours); the class tests cover what has been taught by then

    • Boussinesq and Westergaard theories
    • Newmark's influence chart
  2. Module 2: Shallow Foundations

    6 hours

    Bearing capacity and settlement by IS methods; foundations on rock; geotechnical design of rafts; geocell-improved footings.

    Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then

    • Meyerhof, Hansen, Vesic and IS methods
    • Allowable and differential settlement
    • Foundations on rock
    • Raft foundations
  3. Module 3: Pile Foundations

    7 hours

    Types of piles; capacity of single piles and groups; pile load tests to IS 2911; geotechnical design of piles and caps to IS 2911 and IRC 78.

    Examined in the 80-mark end-semester paper (about 18% of it, by lecture hours); the class tests cover what has been taught by then

    • Classification and installation of piles
    • Static capacity of piles
    • Pile groups and negative skin friction
    • Pile load tests
  4. Module 4: Floating and Well Foundations

    6 hours

    Floating foundations, flotation and heave; floating foundations on piles; well foundations and their forces.

    Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then

    • Floating foundations
    • Well foundations: components and sinking
  5. Module 5: Sheet Piles and Braced Cuts

    8 hours

    Cantilever and anchored sheet piles in sand and clay; embedment depth; apparent earth pressure; reinforced soil walls; strut loads in braced cuts.

    Examined in the 80-mark end-semester paper (about 21% of it, by lecture hours); the class tests cover what has been taught by then

    • Cantilever and anchored sheet piles
    • Braced cuts and strut loads
    • Reinforced soil retaining walls
  6. Module 6: Machine Foundations

    8 hours

    Dynamic soil properties to IS 5249; types of machine vibration; principles of machine foundations.

    Examined in the 80-mark end-semester paper (about 21% of it, by lecture hours); the class tests cover what has been taught by then

    • Dynamic soil properties
    • Principles of machine foundation design

Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.