Mumbai University · Final Year Civil Engineering · Rev-2019 'C' Scheme
Design of Hydraulic Structures
CEDLO8012 · Department Optional Course 5 · Semester VIII · 3 credits · Internal tests 20 (average of two) + end-semester 80
End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four. Each module's share of the paper follows its lecture hours.
One of the Department Optional Course 5 options.
Module 1: Reservoir Planning
5 hoursReservoir types, sites and investigations; storage zones; mass inflow and demand curves; capacity and safe yield; losses and sedimentation; multipurpose reservoirs; flood routing.
Examined in the 80-mark end-semester paper (about 13% of it, by lecture hours); the class tests cover what has been taught by then
- Reservoir capacity by mass curve
- Reservoir sedimentation and trap efficiency
- Multipurpose reservoirs
Module 2: Gravity Dams
10 hoursForces and load combinations; stability and failure modes; principal and shear stresses; elementary and practical profiles; high and low dams; design; galleries, joints, keys, seals and crack control.
Examined in the 80-mark end-semester paper (about 26% of it, by lecture hours); the class tests cover what has been taught by then
- Forces on gravity dams
- Stability and modes of failure
- Elementary profile of a gravity dam
- Construction of gravity dams
Module 3: Arch and Buttress Dams
4 hoursTypes of arch dams, forces and design; buttress dams.
Examined in the 80-mark end-semester paper (about 10% of it, by lecture hours); the class tests cover what has been taught by then
- Arch and buttress dams
Module 4: Earth and Rockfill Dams
9 hoursTypes and failures of earth dams; design criteria and sections; drainage; seepage and the phreatic line; slope stability in steady seepage, drawdown and construction; slope protection and seepage control; earthquake design; rockfill dams.
Examined in the 80-mark end-semester paper (about 23% of it, by lecture hours); the class tests cover what has been taught by then
- Types and components of earth dams
- Phreatic line and seepage
- Stability by the Swedish slip circle
- Seepage control
- Rockfill dams
Module 5: Spillways and Flood Control
6 hoursSpillway types and design of the ogee spillway; energy dissipation, hydraulic jumps, buckets and stilling basins; crest and radial gates; outlet works.
Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then
- Types of spillways
- Design of ogee spillway
- Energy dissipation and stilling basins
- Spillway gates
Module 6: Miscellaneous Structures
5 hoursDiversion headworks; weirs and barrages; Bligh's, Lane's and Khosla's theories; falls and regulators; canal escapes; cross-drainage works.
Examined in the 80-mark end-semester paper (about 13% of it, by lecture hours); the class tests cover what has been taught by then
- Diversion headworks
- Bligh's and Lane's theories
- Khosla's theory
- Canal structures
- Cross-drainage works
Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.