Mumbai University BE Civil syllabus

Mumbai University · Final Year Civil Engineering · Rev-2019 'C' Scheme

Design and Drawing of Reinforced Concrete Structures

CEC701 · Semester VII · 3 credits · Internal tests 20 (average of two) + end-semester 80

End-semester paper (4 hours): Six questions of 20 marks; Q1 is compulsory and you answer four. Each module's share of the paper follows its lecture hours.

A 4-hour paper; relevant IS codes are allowed in the examination.

  1. Module 1: Comprehensive Design of a Building

    11 hours

    Analysis and design of a G+3 RCC framed building; load transfer and framing; dog-legged and open-well stairs; one-way and two-way continuous slabs; simply supported, cantilever and continuous beams; axially and eccentrically loaded columns; isolated and combined footings.

    Examined in the 80-mark end-semester paper (about 28% of it, by lecture hours); the class tests cover what has been taught by then

    • Design of a G+3 RCC framed building
    • Load transfer and framing plans
    • Dog-legged staircase
    • Open-well staircase
    • Two-way slabs
    • Continuous beams by IS code coefficients
    • Columns with uniaxial and biaxial bending
    • Isolated footings
    • Combined footings
  2. Module 2: Retaining Walls

    6 hours

    Design of cantilever and counterfort retaining walls.

    Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then

    • Design of cantilever retaining walls
    • Design of counterfort retaining walls
  3. Module 3: Water Tanks

    7 hours

    Classification and permissible stresses; circular and rectangular tanks on and below ground to IS 3370:2020 by the IS coefficient and approximate methods; elevated tanks with frame and shaft staging.

    Examined in the 80-mark end-semester paper (about 18% of it, by lecture hours); the class tests cover what has been taught by then

    • Water tanks to IS 3370
    • Circular and rectangular tanks on ground
    • Elevated tanks and staging
  4. Module 4: Introduction to Structural Dynamics

    6 hours

    Static and dynamic loads; SDOF systems and their response; approximate time period of vibration.

    Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then

    • Dynamic loads and SDOF response
    • Approximate time period of buildings
  5. Module 5: Earthquake-resistant Design

    6 hours

    Earthquake motion and structural response; design loads by the seismic coefficient method; ductile detailing to IS 13920.

    Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then

    • Seismic coefficient method
    • Ductile detailing to IS 13920
  6. Module 6: Introduction to Prestressed Concrete

    3 hours

    Principles, materials and systems of prestressing; losses of prestress.

    Examined in the 80-mark end-semester paper (about 8% of it, by lecture hours); the class tests cover what has been taught by then

    • Principles of prestressed concrete
    • Losses in prestress

Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.