Mumbai University BE Civil syllabus

Mumbai University · Final Year Civil Engineering · Rev-2019 'C' Scheme

Bridge Engineering

CEDLO8011 · Department Optional Course 5 · Semester VIII · 3 credits · Internal tests 20 (average of two) + end-semester 80

End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four. Each module's share of the paper follows its lecture hours.

One of the Department Optional Course 5 options. IRC 6, IRC 112 and IS 1343 are allowed in the examination.

  1. Module 1: Introduction

    2 hours

    Types and components of bridges; site selection and investigations; economic span.

    Examined in the 80-mark end-semester paper (about 5% of it, by lecture hours); the class tests cover what has been taught by then

    • Bridge types and components
    • Economic span
  2. Module 2: IRC Loads and Superstructure Design

    20 hours

    Class AA, 70R, A and B loading; RC culverts; balanced cantilever bridges; PSC deck slab and I-girder bridges by limit state.

    Examined in the 80-mark end-semester paper (about 51% of it, by lecture hours); the class tests cover what has been taught by then

    • Bridge loading standards
    • Design of slab culverts
    • Balanced cantilever bridges
    • Prestressed T-beam bridge decks
    • PSC I-girder bridges
  3. Module 3: IRS Loads and Steel Lattice Girders

    8 hours

    IRS loadings; analysis of broad-gauge lattice girders; design guidelines for chords, diagonals and end posts.

    Examined in the 80-mark end-semester paper (about 21% of it, by lecture hours); the class tests cover what has been taught by then

    • IRS loading for railway bridges
    • Truss bridge configurations
    • Design of truss bridge members
  4. Module 4: Substructure

    4 hours

    Well and pile foundations; piers, abutments and wing walls; bearings.

    Examined in the 80-mark end-semester paper (about 10% of it, by lecture hours); the class tests cover what has been taught by then

    • Bridge foundations, piers and abutments
    • Functions and types of bearings
  5. Module 5: Erection and Construction

    2 hours

    Erection of girders; cantilever construction.

    Examined in the 80-mark end-semester paper (about 5% of it, by lecture hours); the class tests cover what has been taught by then

    • Erection of bridge girders
  6. Module 6: Inspection and Repairs

    3 hours

    Inspection categories and instruments; repair, retrofitting and rehabilitation of bridges.

    Examined in the 80-mark end-semester paper (about 8% of it, by lecture hours); the class tests cover what has been taught by then

    • Bridge inspection
    • Repair and rehabilitation of bridges

Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.