Mumbai University BE Civil syllabus

Mumbai University · Final Year Civil Engineering · Rev-2019 'C' Scheme

Applied Hydrology and Flood Control

CEDLO7012 · Department Optional Course 3 · Semester VII · 3 credits · Internal tests 20 (average of two) + end-semester 80

End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four. Each module's share of the paper follows its lecture hours.

One of the Department Optional Course 3 options.

  1. Module 1: Hydrology and Precipitation

    8 hours

    Hydrological cycle and water budget; rain gauges and network adequacy; average rainfall; hyetographs and mass curves; missing data and double mass curves; DAD and IDF relationships; PMP.

    Examined in the 80-mark end-semester paper (about 21% of it, by lecture hours); the class tests cover what has been taught by then

    • Hydrological cycle
    • Precipitation and rain gauges
    • Mean areal precipitation
    • Depth-area-duration and IDF curves
  2. Module 2: Abstractions and Stream Flow

    6 hours

    Evaporation, transpiration, interception and infiltration indices; direct and indirect stream gauging; stage–discharge and rating curves; dilution, electromagnetic and ultrasonic methods.

    Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then

    • Evaporation and evapotranspiration
    • Infiltration and infiltration indices
    • Stream gauging
  3. Module 3: Runoff

    6 hours

    Catchments and drainage basins; factors affecting runoff; rainfall–runoff relations; droughts.

    Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then

    • Runoff and its estimation
    • Droughts
  4. Module 4: Hydrograph Analysis

    7 hours

    Hydrograph characteristics; base flow separation; unit, S-curve, complex, synthetic and instantaneous unit hydrographs.

    Examined in the 80-mark end-semester paper (about 18% of it, by lecture hours); the class tests cover what has been taught by then

    • Hydrographs and base flow separation
    • Unit hydrograph and S-curve
    • Synthetic and instantaneous unit hydrographs
  5. Module 5: Floods

    6 hours

    Envelope curves and flood frequency studies; design floods; flood control; risk and reliability; hydrologic and hydraulic routing.

    Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then

    • Flood estimation and frequency analysis
    • Flood routing: Muskingum method
    • Flood control methods
  6. Module 6: Ground Water Hydrology

    6 hours

    Darcy's law and Dupuit's theory; steady flow to wells; unsteady flow and Jacob's method; pumping tests; recharge.

    Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then

    • Aquifers and their properties
    • Well hydraulics

Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.