Mumbai University · Final Year Civil Engineering · Rev-2019 'C' Scheme
Analysis of Offshore Structures
CEDLO7014 · Department Optional Course 3 · Semester VII · 3 credits · Internal tests 20 (average of two) + end-semester 80
End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four. Each module's share of the paper follows its lecture hours.
One of the Department Optional Course 3 options.
Module 1: Types of Offshore Structures
5 hoursTypes, planning and design aspects; functional, environmental and accidental loads with emphasis on wind and waves.
Examined in the 80-mark end-semester paper (about 13% of it, by lecture hours); the class tests cover what has been taught by then
- Types of offshore structures
- Loads on offshore structures
Module 2: Materials and Behaviour
6 hoursHydrodynamic interaction and dynamic response; materials under static and dynamic loads; allowable stresses; design methods and codes.
Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then
- Hydrodynamic interaction
- Materials for offshore structures
- Design methods and codes
Module 3: Analysis
6 hoursHydrodynamics and structural dynamics; Airy and higher-order wave theories; irregular seas; extreme statistics; wind loads, aerodynamic admittance and gust factor.
Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then
- Airy wave theory
- Higher-order wave theories and irregular seas
- Wind loads and gust factor
Module 4: Wave Forces
6 hoursMorison's equation; lift and slam; forces on piles and bracings; large members by Froude–Krylov and diffraction theory; drift force; spectral analysis.
Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then
- Morison's equation
- Wave forces on piles and bracings
- Froude-Krylov and diffraction theories
- Spectral analysis of wave forces
Module 5: Vibrations
10 hoursFree, damped, forced and torsional vibration; SDOF and MDOF systems; eigenvalues and mode superposition; spectral response; vibration of bars and beams; gravity platforms on soil.
Examined in the 80-mark end-semester paper (about 26% of it, by lecture hours); the class tests cover what has been taught by then
- Free and forced vibration
- MDOF systems and mode superposition
- Spectral response of offshore structures
- Concrete gravity platforms
Module 6: Corrosion and Allowances
6 hoursCorrosion and other allowances; stress concentration; protective measures.
Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then
- Corrosion of offshore structures
- Stress concentration and protective measures
Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.